Air Source heat pumps

NIBE VVM S320

  • Product information
  • Advantages

The NIBE VVM S320 is designed for combination with any NIBE air source heat pump to create a highly efficient climate system for your home. The NIBE VVM S320 has a smart, user-friendly control system which provides efficient heating/ cooling and hot water with high performance. The NIBE VVM S320 is ready for installation since the water heater, electric additional heat, self-regulating circulation pump, filling valve, manometer, safety valve and expansion vessel are included. With integrated wifi, the S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.

    Integrated system

    Combine with a NIBE air source heat pump for an integrated system

    Smart

    Smart, user-friendly control system.

    User-friendly

    User-friendly touch control and integrated wireless connectivity with energy saving smart technology for maximum comfort.

NIBE VVM S320
  • Accessories
  • Technical data
  • Document
  • NIBE VVM S320
  • NIBE VVM S320
NIBE KVR 10 F2120

NIBE KVR 10 F2120

NIBE CDS 10

NIBE CDS 10

This wireless sensor allows you to read the CO2, temperature and humidity level in a room or climate zone using the myUplink app. For NIBE S-series heating installations with ventilation the indoor comfort level can automatically be adjusted to give you a comfortable indoor climate. For example, you can increase ventilation and lower the CO2 level when there are a lot of people present or lower the ventilation to further reduce your energy costs. Because it is battery powered, it is easy to install, but it can also operate with an external power source using a micro USB. Mount the sensor in your room and connect it to your NIBE S-Series heat and ventilation installation.

NIBE THS 10

NIBE THS 10

This wireless sensor allows you to read the temperature and humidity in a room or climate zone using the myUplink app. On the heat pump you can see the current room temperature or change it in °C. THS 10 replaces the fixed indoor sensor. Because it is battery powered, it is easy to install. Mount the sensor in your room and connect it to your NIBE S-Series heating installation.

NIBE RMU S40

NIBE RMU S40

The NIBE RMU S40 is a room unit with 2,8” touch display with built in temperature and humidity sensors. It is used to control and monitor your NIBE S series heat pump/indoor module from another room in the house than the room where the heat pump is placed. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.

NIBE ERS 20-250

NIBE ERS 20-250

The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE ECS 40

NIBE ECS 40

Extra heating circuit (maximum 80 m2 floor heating). ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE ERS 10-400

NIBE ERS 10-400

The NIBE ERS 10-400/ERS 20-250 are heat recovery ventilation units with high temperature efficiency up to 92% and low energy consumption. The NIBE ERS 10 is used in houses with areas up to approx. 300 m2, NIBE ERS 20 up to approx. 200 m2. The NIBE ERS 10-400/ERS 20-250 are designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation units are easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE ERS S10-400

NIBE ERS S10-400

The NIBE ERS S10-400 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 300 m2. The NIBE ERS S10-400 is designed for installation with a NIBE ground source heat pump or a NIBE air source heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.

NIBE ROT 10

NIBE ROT 10

The wireless room thermostat allows you to read and control the temperature of a room or a climate zone from the display of the room thermostat or via the myUplink app in your smartphone. For instance by increasing the hot water production when you have many guests or lower the ventilation for better savings when you are not home. Because it is powered by a rechargeable battery, it is easy to install. Mount the thermostat in your room and connect it to your NIBE S-Series heat pump.

NIBE RPP 10

NIBE RPP 10

Enhances the signal, improving communication between your smart home products when they are placed at a distance from each other. For NIBE S- Series heating installations, the repeater functions as a switch, giving you the opportunity to control it remotely, schedule On and Off times and measure energy consumption. Plug in the repeater and connect it to your NIBE S-Series heating installation.

NIBE ECS 41

NIBE ECS 41

Extra heating circuit (maximum 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE HTS 40

NIBE HTS 40

HTS 40 is an accessory that records humidity and temperature.

NIBE EF 45

NIBE EF 45

NIBE POOL 310

NIBE POOL 310

Pool heating. POOL 310 is an accessory that enables pool heating with VVM 320.

NIBE AXC 40

NIBE AXC 40

Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat Pump for hot water circulation Groundwater pump

NIBE Top cabinet

NIBE Top cabinet

NIBE EME 20

NIBE EME 20

Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.

  • NIBE VVM S320
Height (mm)
1800 
Width (mm)
600 
Depth (mm)
615 
Net weight (kg)
146 
  • NIBE VVM S320
  • NIBE VVM S320