The NIBE SMO S40 gives optimised control of the climate system and is designed to be combined with NIBE air source heat pumps to provide an integrated climate system for homes and properties. The NIBE SMO S40 offers maximum flexibility when it comes to system solutions. The control module can be connected to components such as a water heater, additional heat sources and other accessories specific to a customised installation. Up to eight NIBE air source heat pumps can be connected to a control system.
Smart home
In combination with a NIBE air/water heat pump – a part of your energy-saving smart home.
User-friendly
Smart, user-friendly system with touch control for maximum flexibility.
This accessory is used to enable connection and control of Shunt controlled additional heat Step controlled additional heat Extra climate system Hot water comfort Connection of several heat pumps
Enhances the signal, improving communication between your smart home products when they are placed at a distance from each other. For NIBE S- Series heating installations, the repeater functions as a switch, giving you the opportunity to control it remotely, schedule On and Off times and measure energy consumption.Plug in the repeater and connect it to your NIBE S-Series heating installation.
This accessory allows the heat pumps together with NIBE SMO 20 or NIBE SMO 40 to prioritize hot water charging
Immersion heater for DHW cylinders (VPA and VPB500-1000)
Extra heating circuit (maximum 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
NIBE SOLAR 42 enables solar heating with your heat pump. With additional solar panels and VPBS you get a complete system.
This accessory allows hot water priority for larger heat pumps (maximum load power 40 kW), such as NIBE F1345
The wireless room thermostat allows you to read and control the temperature of a room or a climate zone from the display of the room thermostat or via the myUplink app in your smartphone. For instance by increasing the hot water production when you have many guests or lower the ventilation for better savings when you are not home.Because it is powered by a rechargeable battery, it is easy to install.Mount the thermostat in your room and connect it to your NIBE S-Series heat pump.
This wireless sensor allows you to read the temperature and humidity in a room or climate zone using the myUplink app. On the heat pump you can see the current room temperature or change it in °C.THS 10 replaces the fixed indoor sensor. Because it is battery powered, it is easy to install.Mount the sensor in your room and connect it to your NIBE S-Series heating installation.
The NIBE RMU S40 is a room unit with 2,8” touch display with built in temperature and humidity sensors. It is used to control and monitor your NIBE S series heat pump/indoor module from another room in the house than the room where the heat pump is placed. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
Immersion heater for DHW cylinders (VPA and VPB500-1000)
Immersion heater for DHW cylinders (VPA and VPB500-1000)
Connection box for immersion heater with thermostat and overheating protection
Electric boilers for additional heating for ground source heat pumps.
Electric boilers for additional heating for ground source heat pumps.
This wireless sensor allows you to read the CO2, temperature and humidity level in a room or climate zone using the myUplink app. For NIBE S-series heating installations with ventilation the indoor comfort level can automatically be adjusted to give you a comfortable indoor climate. For example, you can increase ventilation and lower the CO2 level when there are a lot of people present or lower the ventilation to further reduce your energy costs. Because it is battery powered, it is easy to install, but it can also operate with an external power source using a micro USB.Mount the sensor in your room and connect it to your NIBE S-Series heat and ventilation installation.
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating houses or smaller apartment blocks.
Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.
An accessory that allows pool heating using heat pump. Max 18 kW. The heat pump controls the reversing valve, pool circulation pumpand any heating circuit circulation pumps via POOL 40.
Extra heating circuit (maximum 80 m2 floor heating). ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.
Height (mm)
350
Width (mm)
540
Depth (mm)
110
Net weight (kg)
5