NIBE product range

NIBE VVM 225

Air/Water heat pump
  • Product information
  • Advantages

The NIBE VVM 225 is designed for combination with NIBE air/water heat pump to create a highly- efficient climate system for your home. The NIBE VVM 225 has a smart, user-friendly control system which provides efficient heating and hot water with high performance. The NIBE VVM 225 is ready for installation since the water heater, electric additional heat, self-regulating circulation pump, filling valve, manometer, safety valve and expansion vessel are included. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected home. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

Plug and play

Combine NIBE VVM 225 with a NIBE air/water heat pump for an energy-efficient climate system.

Energy-saving system

Energy-saving smart technology with user-friendly control.

A simpler life

Part of your smart home – Control your comfort online using NIBE Uplink.

  • Functions
  • Accessories
  • Technical data
  • Document
NIBE VVM 225

Extended functions

With the help of our large range of accessories, the heat pump can offer a variety of functions for heating, cooling, ventilation and solar production. Click on the "Accessories" tab above to read more about the different accessories offered.

NIBE EMK 310

Energy measurement kit for indoor unit.

NIBE SCA 35

Possible connection and control of solar heating.

NIBE ACS 310

Active cooling

NIBE UKV 300

The NIBE UKV is a series of buffer vessels which are primarily designed for connection to heat pumps to achieve greater volumes with the heating system. This optimises the operation of the heat pump. The NIBE UKV can also be connected to reduce temporary heat spikes caused by movements in the pipe installation during temperature changes. The NIBE UKV is available in the sizes 40, 100, 200, 300 and 500 litres. For systems with active cooling, it is best to use the condensation-insulated NIBE UKV 200 or NIBE UKV 300. For the NIBE UKV 500 the insulation can be removed to make handling the product easier.

NIBE POOL 310

Pool heating

NIBE F135

The NIBE F135 is an exhaust air module designed for docking to a NIBE air/water heat pump and a NIBE indoor module (VVM) or control module (SMO). The NIBE F135 uses the heat that is found in the house’s ventilation air to heat the house and hot water, at the same time as ventilating the house. In installations with cooling, hot water and cooling can be produced at the same time. The exhaust air module provides an improved seasonal performance factor and has a low noise level and high ventilation capacity. The NIBE F135 is easy to control through the heat pump’s indoor module. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE EMK 300

Energy measurement kit for indoor unit.

NIBE EME 10

To optimise the use of solar generated electricity.

NIBE ELK 15

ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.

NIBE ELK 213

The NIBE ELK 213 is an electric heater designed for heating detached houses or smaller rental homes, as well as indirect heating of hot water. The NIBE ELK 213 can be installed together with a boiler, accumulator tank or heat pump. When installed together with a heat pump, for example, the electric heater automatically switches on to provide supplementary heating when the heating demand is greater than the heat pump’s capacity.

NIBE Top cabinet 345 mm

Top cabinet

NIBE Top Cabinet 385-635 mm

Top cabinet

NIBE Top cabinet 245 mm

Top cabinet

NIBE MODBUS 40

A NIBE heat pump can be controlled and monitored by external Modbus equipped equipment.

NIBE ECS 41

Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE RMU 40

With RMU 40 you can control and monitor your Nibe heat pump from another room in the house.

NIBE SMS 40

GSM remote control. Settings via the heat pump’s display. Adjustment of operation mode via SMS. SMS notifications upon alarm and e g power failure. Status information via SMS.

NIBE EF 45

Extension frame.

NIBE AXC 40

Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump

NIBE PV

NIBE PV is an integrated solution which is based on a fully modular system with several basic sizes: 4 / 8 / 12 / 16 / 20 kW. Each basic package has nominal power of 4 kW and consists of 10 panels, mounting parts and an inverter with communication module, all of which are ready for installation. The solar package can easily be expanded with additional solar panels for optimum use of roof space. NIBE PV comprises of monocrystalline silicon cell panels which use PERC technology, with an output of 400 Wp. The solar panels are elegant, all-black panels. NIBE PV harnesses sunlight all year round and converts it into electricity. NIBE PV can be connected to your NIBE heat pump* for maximum energy efficiency. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected home. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time. * applies to systems which can be connected to NIBE Uplink and myUplink.

NIBE ERS 30-400

The NIBE ERS 30-400 is a heat recovery ventilation unit with high temperature efficiency up to 94% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 350 m2. The NIBE ERS 30-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE HTS 40

HTS 40 is an accessory that records humidity and temperature.

NIBE HR 10

Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.

NIBE EME 20

Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.

NIBE ECS 40

ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

Height (mm)

1525

Depth (mm)

615

Net weight (kg)

137

User manual (UHB)
Installer manual (IHB)
Product leaflet (PBD)
Product catalogue (KBR) Air/water heat pumps
Energy Labels (ELI) NIBE VVM 225 Cu
Consumer information leaflet (CIL)