NIBE BA-SVM 10

NIBE Refrigerant pipe kit

Refrigerant pipe kit 12m

NIBE VST 11

Provides the heat pump together with SMO 10 to prioritise hot water charging on systems with floating condensing. This also requires a hot water accumulator, for ex. NIBE VPA. Hot water control for max.electric charge output: 18 kW

NIBE VST 20

Makes hot water priority possible at large heat pump outputs. (charging power between 15 and 40 kW), together with an SMO 10 and F1330-40. This also requires a hot water accumulator, for example, NIBE VPA.

NIBE AXC 30

NIBE POOL 40

The NIBE POOL 40 accessory provides a complete, ready-engineered solution for integrating pool heating into a NIBE ground source heat pump system. Using its dedicated AXC module, motorised 3-way valve and paired pool sensors, the unit automatically diverts heating medium flow through a pool heat exchanger whenever pool heating is enabled. The accessory controls both the pool circulation pump and any required external heating medium pump, ensuring correct flow and accurate temperature readings throughout the charge cycle. Built-in sensor validation ensures pool heating only activates under safe conditions, providing dependable operation and seamless interaction with the wider heat pump system.

NIBE KVR 10-30, 3 M

The NIBE KVR range provides installers with a simple, reliable and freeze protected way to manage condensate drainage from NIBE air source heat pumps. KVR 10 is for the F2050-6 and F2050-10 and is available in multiple lengths, indicated by the suffix; for example, KVR 10-10 = 1 m, KVR 10-30 = 3 m, and KVR 10-60 = 6 m. All variants combine insulated pipework with a thermostat-controlled heating cable that automatically prevents ice formation, ensuring safe drainage even in sub-zero conditions and protecting the heat pump from backflow, frost damage or condensate pooling.

NIBE KVR 10-10, 1 M

Condensation water pipes for F2040. Different lengths, 1, 3 or 6 m.

NIBE KVR 10-60, 6 M

The NIBE KVR range provides installers with a simple, reliable and freeze protected way to manage condensate drainage from NIBE air source heat pumps. KVR 10 is for the F2050-6 and F2050-10 and is available in multiple lengths, indicated by the suffix; for example, KVR 10-10 = 1 m, KVR 10-30 = 3 m, and KVR 10-60 = 6 m. All variants combine insulated pipework with a thermostat-controlled heating cable that automatically prevents ice formation, ensuring safe drainage even in sub-zero conditions and protecting the heat pump from backflow, frost damage or condensate pooling.

NIBE EMK 300

The NIBE EMK 300 energy metering accessories provides installers with a reliable way to monitor the actual energy delivered by a NIBE heating system, measuring both flow and temperature difference within the charge circuit to determine output for heating, domestic hot water or additional climate zones. The kit includes a precision flow meter, pre-terminated communication cable and the necessary pipework and unions for straightforward installation. The EMK 300 is suitable for lower-flow systems.

NIBE HR 20

NIBE RTS 40

Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.

NIBE MODBUS 40

A NIBE heat pump can be controlled and monitored by external Modbus equipped equipment.

NIBE RMU 40

With RMU 40 you can control and monitor your Nibe heat pump from another room in the house.

NIBE HR 10

Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.

NIBE HTS 40

HTS 40 is an accessory that records humidity and temperature.

NIBE EME 20

Communication module that translates Modbus RTU, from a solar inverter, to Modbus TCP/IP, for the heat pump to control the solar inverter

NIBE ECS 40

ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE ECS 41

The NIBE ECS 41 kit allows installers to add one or more additional heating circuits to a NIBE heat pump installation where different supply temperatures are required, such as radiator and underfloor heating combinations. Each kit includes a dedicated AXC accessory module, shunt valve, shunt motor, circulation pump and temperature sensor, enabling the new zone to run as a fully controlled climate system with independent flow temperature, heating curve and pump operation. The ECS 41 is sized for larger UFH areas above 80 m².