NIBE VVM S330

NIBE ELK 42

Back-up electric immersion heater - 42kW

NIBE POOL 310

Pool heating

NIBE ELK 26

Back-up electric immersion heater - 26kW

NIBE EMK 300

Energy metering - 22mm

NIBE ROT 10

The wireless room thermostat allows you to read and control the temperature of a room or a climate zone from the display of the room thermostat or via the myUplink app in your smartphone. For instance by increasing the hot water production when you have many guests or lower the ventilation for better savings when you are not home. Because it is powered by a rechargeable battery, it is easy to install.

Mount the thermostat in your room and connect it to your NIBE S-Series heat pump.

NIBE ELK 15

Three phase back-up electric immersion heater - 15kW

NIBE THS 10

This wireless sensor allows you to read the temperature and humidity in a room or climate zone using the myUplink app. On the heat pump you can see the current room temperature or change it in °C. THS 10 replaces the fixed indoor sensor. Because it is battery powered, it is easy to install.

Mount the sensor in your room and connect it to your NIBE S-Series heating installation.

NIBE RPP 10

Enhances the signal, improving communication between your smart home products when they are placed at a distance from each other. For NIBE S- Series heating installations, the repeater functions as a switch, giving you the opportunity to control it remotely, schedule On and Off times and measure energy consumption.

Plug in the repeater and connect it to your NIBE S-Series heating installation.

NIBE ELK 213

Three phase back-up electric immersion heater - 13kW

NIBE CDS 10

This wireless sensor allows you to read the CO2, temperature and humidity level in a room or climate zone using the myUplink app. For NIBE S-series heating installations with ventilation the indoor comfort level can automatically be adjusted to give you a comfortable indoor climate. For example, you can increase ventilation and lower the CO2 level when there are a lot of people present or lower the ventilation to further reduce your energy costs. Because it is battery powered, it is easy to install, but it can also operate with an external power source using a micro USB.

Mount the sensor in your room and connect it to your NIBE S-Series heat and ventilation installation.

NIBE RMU S40

The NIBE RMU S40 is a room unit with 2,8” touch display with built in temperature and humidity sensors. It is used to control and monitor your NIBE S series heat pump/indoor module from another room in the house than the room where the heat pump is placed.

The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.

NIBE EF 45

Extension frame.

NIBE HR 10

Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.

NIBE SRV 10

Wireless smart radiator thermostat

NIBE S135

The NIBE S135 is an exhaust air module designed for docking to a NIBE air/water heat pump and a NIBE VVM indoor module or NIBE SMO control module. The NIBE S135 uses the heat that is found in the house’s ventilation air to heat the house and hot water, at the same time as ventilating the house. In installations with cooling, hot water and cooling can be produced at the same time.

The exhaust air module provides an improved seasonal performance factor and has a low noise level and high ventilation capacity. The NIBE S135 is easy to control through the heat pump’s indoor module.

The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.

NIBE AXC 40

Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump

NIBE ELK 213 EXP

Three phase back-up electric immersion heater - 13kW

NIBE EME 20

Communication module that translates Modbus RTU, from a solar inverter, to Modbus TCP/IP, for the heat pump to control the solar inverter

NIBE HTS 40

HTS 40 is an accessory that records humidity and temperature.

NIBE ECS 41

Allows the heat pump to control a second heating circuit (zone) with a different temperature requirement. For more than 80 m² of underfloor heating

NIBE TOC 30 Top Cabinet 385-635 mm

Top cover for ERS MVHR units to conceal ducting. 245mm tall.

NIBE TOC 30 Top cabinet 245 mm

Top cover for ERS MVHR units to conceal ducting. 245mm tall.

NIBE TOC 30 Top cabinet 345 mm

Top cover for ERS MVHR units to conceal ducting. 245mm tall.

NIBE ECS 40

ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.