NIBE F1355

NIBE SMS 40

GSM remote control. Settings via the heat pump’s display. Adjustment of operation mode via SMS. SMS notifications upon alarm and e g power failure. Status information via SMS.

NIBE ACS 45

Active/Passive cooling (4-pipe). ACS 45 combined with a heat pump is a climate control system for heating and cooling houses and apartment buildings.

NIBE AXC 50

An accessory card is required if step controlled additional heat (e.g. external electric boiler) or if shunt controlled additional heat (e.g. wood/oil/gas/pellet boiler), passive/active cooling 2 pipe, passive cooling 2 respectively 4 pipe or if hot water comfort is to be connected to F1345.

NIBE ECS 41

Extra heating circuit (maximum 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE ECS 40

Extra heating circuit (maximum 80 m2 floor heating). ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE ELK 26

Electric boilers for additional heating for ground source heat pumps.

NIBE ELK 42

Electric boilers for additional heating for ground source heat pumps.

NIBE ELK 15

ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating houses or smaller apartment blocks.

NIBE MODBUS 40

A NIBE heat pump can be controlled and monitored by external Modbus equipment. NIBE ModbusManager is a program package for users of NIBE MODBUS 40.

NIBE RTS 40

Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.

NIBE VST 11

This accessory allows the heat pumps together with NIBE SMO 20 or NIBE SMO 40 to prioritize hot water charging

NIBE VST 20

This accessory allows hot water priority for larger heat pumps (maximum load power 40 kW), such as NIBE F1345

NIBE FLM

Exhaust air module. The addition of FLM module further reduces your heating bills. Developed to work in conjunction with NIBE ground source heat pumps the FLM module recycles old, stale air from the house, extracts the energy from it and reuses it to heat new, clean air from outside. Air quality is improved while warmth is maintained

NIBE EME 20

Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.

Console package

NIBE POOL 40

An accessory that allows pool heating using heat pump. Max 17 kW. The heat pump controls the reversing valve, pool circulation pump and any heating circuit circulation pumps via POOL 40.

NIBE SOLAR 40

NIBE SOLAR 40 enables solar heating with your heat pump. With additional solar panels and VPAS you get a complete system.

NIBE RMU 40

With RMU 40 you can control and monitor your NIBE heat pump from another room in the house.

NIBE HPAC 40

Climate exchange module. Elegant and timeless design High flexibility for the best indoor climate Passive cooling Active cooling in combination with the heating of hot water Installer-friendly Settings shown on the heat-pump’s display

NIBE AXC 40

Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat Pump for hot water circulation Groundwater pump

NIBE KB 25

Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.

NIBE ERS 20-250

The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE ERS 10-400

The NIBE ERS 10-400/ERS 20-250 are heat recovery ventilation units with high temperature efficiency up to 92% and low energy consumption. The NIBE ERS 10 is used in houses with areas up to approx. 300 m2, NIBE ERS 20 up to approx. 200 m2. The NIBE ERS 10-400/ERS 20-250 are designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation units are easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.