NIBE F1355 is an intelligent and powerful inverter controlled ground source heat pump. NIBE F1355 provides optimum savings since the heat pump always performs efficiently and automatically adapts to the property’s output requirements all year round. NIBE is a leading player in the field of inverter technology, with many years’ experience of variable output ground source heat pumps and one of the widest product ranges on the market. NIBE F1355 has a high seasonal performance factor and an operating range of 4–28 kW. With less than 5 tonnes CO2 equivalent refrigerant volume per refrigeration module. Two compressors provide efficient output regulation and high reliability, making NIBE F1355 perfect for properties with larger heating requirements.
Top performance
Inverter technology for minimal operating costs and optimal seasonal performance factor.
Reliable
Efficient output regulation and high level of reliability for larger heating requirements.
Remote control
Smart technology with user-friendly control for easy remote control.
Extended functions
With the help of our large range of accessories, the heat pump can offer a variety of functions for heating, cooling, ventilation and solar production. Click on the "Accessories" tab above to read more about the different accessories offered.
Inverter controlled compressor
The heat pump has an inverter-controlled compressor that helps you as it automatically adapts to your house and supplies your plant with renewable energy.
Three phase back-up electric immersion heater - 42kW
The AXC 50 is an accessory card paired with NIBE commercial Ground Source Heat Pumps such as the F1345/55 range, used to control and communicate with additional systems, such as extra climate systems, shunt-controlled additional heat, step-controlled additional heat, passive cooling, active cooling, etc.
Enables passive and active cooling in a ground source heat pump system. Required in conjunciton with the PCM accessoryCompatibe with F-Series heat pumps.
Three phase back-up electric immersion heater - 26kW
4-Pipe Passive/Active Cooling Accessory
Filling and flushing kit used during the installation or maintenance of a ground source heat pump system. Allows filling or topping up of the brine circuit. For heat pumps up to 30kW
This accessory allows hot water priority for larger heat pumps (maximum load power 40 kW), such as NIBE F1345
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating houses or smaller apartment blocks. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.
Three phase back-up electric immersion heater - 15kW
An accessory that allows pool heating using heat pump. Max 18 kW. The heat pump controls the reversing valve, pool circulation pump and any heating circuit circulation pumps via POOL 40.
Communication module that allows the heat pump to be controlled by an external control system. Modbus RTU language allows to heat pump to become the slave.
Internal room temperature sensor
Wired button controller
An exhaust air module that recovers heat from indoor ventilation air and transfers it to the brine circuit, boosting the efficiency of the connected ground source heat pump. It also provides mechanical ventilation, improving indoor air quality while helping reduce the size of the ground collector needed. Compatible with F-Series heat pumps.
A relay box accessory that acts as an interface between the heat pump and external devices, e.g. immersion heaters, cooling modules, external heat sources. It lets the heat pump turn other equipment on / off depending on the systems needs.
Communication module that translates Modbus RTU, from a solar inverter, to Modbus TCP/IP, for the heat pump to control the solar inverter
Allows the heat pump to control a second heating circuit (zone) with a different temperature requirement. For up to 80 m² of underfloor heating
Extra heating circuit (maximum 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
Height (mm)
1800
Width (mm)
600
Depth (mm)
600
Net weight (kg)
335
Product efficiency class room heating, 35 °C
A+++
Product efficiency class room heating, 55 °C
A+++
System efficiency class room heating, 35 °C
A+++
System efficiency class room heating, 55 °C
A+++
Refrigerant volume, CO² equivalent (ton)
3,90 / 3,55
Refrigerant volume, R407C (kg)
2,2/2,0
Our S-Series range is designed to be used with myUplink to create an efficient climate system for your home.
The NIBE ERS S10-400 is designed for installation with a NIBE ground or air source heat pump for a complete heating and ventilation system.