Ground source heat pumps
NIBE F1355 is an intelligent and powerful invertercontrolled ground source heat pump. NIBE F1355 provides optimum savings since the heat pump always performs efficiently and automatically adapts to the property’s output requirements all year round. NIBE is a leading player in the field of inverter technology, with many years’ experience of variable output ground source heat pumps and one of the widest product ranges on the market. NIBE F1355 has a high seasonal performance factor and an operating range of 4–28 kW. With less than 5 tonnes CO2 equivalent refrigerant volume per refrigeration module, NIBE F1355 does not require annual inspection. Two compressors provide efficient output regulation and high reliability, making NIBE F1355 perfect for properties with larger heating requirements. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
Inverter technology for minimal operating costs and optimal seasonal performance factor.
Efficient output regulation and high level of reliability for larger heating requirements.
Smart technology with user-friendly control for easy remote control.
GSM remote control. Settings via the heat pump’s display. Adjustment of operation mode via SMS. SMS notifications upon alarm and e g power failure. Status information via SMS.
Active/Passive cooling (4-pipe). ACS 45 combined with a heat pump is a climate control system for heating and cooling houses and apartment buildings.
Accessory card. An accessory card is required if step controlled additional heat (e.g. external electric boiler) or if shunt controlled additional heat (e.g. wood/oil/gas/pellet boiler), passive/active cooling 2 pipe, passive cooling 2 respectively 4 pipe or if hot water comfort is to be connected to F1345. An accessory card is also required if the ground water pump or external circulation pump is connected to F1345 at the same time that the buzzer alarm is activated.
Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
The NIBE ELK 213 is an electric heater designed for heating detached houses or smaller rental homes, as well as indirect heating of hot water. The NIBE ELK 213 can be installed together with a boiler, accumulator tank or heat pump. When installed together with a heat pump, for example, the electric heater automatically switches on to provide supplementary heating when the heating demand is greater than the heat pump’s capacity.
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating houses or
Electric boilers for additional heating for ground source heat pumps.
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.
HTS 40 is an accessory that records humidity and temperature.
A NIBE heat pump can be controlled and monitored by external Modbus equipped equipment.
Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.
Provides the heat pump together with SMO 10 to prioritise hot water charging on systems with floating condensing. This also requires a hot water accumulator, for ex. NIBE VPA. Hot water control for max.electric charge output: 17 kW
Makes hot water priority possible at large heat pump outputs. (charging power between 15 and 40 kW), together with an SMO 10 and F1330-40. This also requires a hot water accumulator, for example, NIBE VPA.
The NIBE FLM is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.
FLM - Console package
An accessory that allows pool heating using heat pump. Max 17 kW. The heat pump controls the reversing valve, pool circulation pump and any heating circuit circulation pumps via POOL 40.
NIBE SOLAR 40 enables solar heating with your heat pump. With additional solar panels and VPAS you get a complete system.
With RMU 40 you can control and monitor your Nibe heat pump from another room in the house.
Climate exchange module. Elegant and timeless design,High flexibility for the best indoor climate, Passive cooling, Active cooling in combination with the heating of hot water, Installer-friendly, Settings shown on the heat-pump’s display.
The NIBE HPAC 45 accessory gives your installation a high degree of flexibility. Combine your heat pump with NIBE HPAC 45 for passive or active cooling. It works, even while your system is continually heating hot water. NIBE HPAC 45 is easily controlled via the heat pump’s control panel, where both settings and monitoring are easily handled at the push of a button. This accessory’s timeless design means that it blends in well with your other heat pump equipment.
Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump
Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.
Energy measurement kit for indoor unit.
The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.