Ground source heat pumps

NIBE F1155

  • Product information
  • Advantages

NIBE F1155 is an intelligent, inverter-controlled ground source heat pump without integrated hot water tank, which makes it easy to install in locations with low ceilings. A separate hot water tank is selected according to hot water requirements. NIBE F1155 provides optimum savings since the heat pump automatically adapts to your home’s heating demand. NIBE is a leading player in the field of inverter technology, with many years’ experience of output-regulating ground source heat pumps and one of the widest product ranges on the market. NIBE F1155 has a high seasonal performance factor, resulting in minimal operating costs. The heat pump is available in three different output sizes: 1.5-6 kW, 3-12 kW and 4-16 kW, and is suitable for both small and large properties. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected home. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

    Optimum customisation

    Leading inverter technology and separate hot water tank for optimum customisation.

    Top performance

    Three output sizes for optimal seasonal performance factor and minimal operating costs.

    Maximum comfort

    Energy-saving smart technology with user-friendly control for maximum comfort.

NIBE F1155
  • Accessories
  • Technical data
  • Document
  • NIBE F1155 1,5-6 kW
  • NIBE F1155 3-12 kW
  • NIBE F1155 4-16 kW
  • NIBE F1155 1,5-6 kW
  • NIBE F1155 3-12 kW
  • NIBE F1155 4-16 kW
NIBE ACS 45

NIBE ACS 45

Active/Passive cooling (4-pipe). ACS 45 combined with a heat pump is a climate control system for heating and cooling houses and apartment buildings.

NIBE AXC 40

NIBE AXC 40

Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump

NIBE ECS 40

NIBE ECS 40

ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE ECS 41

NIBE ECS 41

Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE EF 45

NIBE EF 45

Extension frame

NIBE ELK 15

NIBE ELK 15

ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.

NIBE ELK 213

NIBE ELK 213

The NIBE ELK 213 is an electric heater designed for heating detached houses or smaller rental homes, as well as indirect heating of hot water. The NIBE ELK 213 can be installed together with a boiler, accumulator tank or heat pump. When installed together with a heat pump, for example, the electric heater automatically switches on to provide supplementary heating when the heating demand is greater than the heat pump’s capacity.

NIBE EME 10

NIBE EME 10

To optimise the use of solar generated electricity.

NIBE FLM

NIBE FLM

The NIBE FLM is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE FLM - Console package

NIBE FLM - Console package

FLM - Console package

NIBE HR 10

NIBE HR 10

Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.

NIBE HTS 40

NIBE HTS 40

HTS 40 is an accessory that records humidity and temperature.

NIBE KB 25

NIBE KB 25

Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.

NIBE MODBUS 40

NIBE MODBUS 40

A NIBE heat pump can be controlled and monitored by external Modbus equipped equipment.

NIBE NV 10

NIBE NV 10

Level monitor of brine collector circuit.

NIBE PCS 44

NIBE PCS 44

Passive cooling. PCS 44 is used when heat pump is installed in an installation with passive cooling.

NIBE PLEX

NIBE PLEX

Tap water exchanger. PLEX is a plate heat exchanger with plates manufactured from acid-resistant steel (SS 23 43). PLEX is available in seven different models. Insulation, consisting of two 30 mm-thick, moulded halves of polyurethane foam, corresponding to approx. 70 mm mineral wool, is included. The surface is covered by ABS plastic.

NIBE RMU 40

NIBE RMU 40

With RMU 40 you can control and monitor your Nibe heat pump from another room in the house.

NIBE SMS 40

NIBE SMS 40

GSM remote control. Settings via the heat pump’s display. Adjustment of operation mode via SMS. SMS notifications upon alarm and e g power failure. Status information via SMS.

NIBE SOLAR 40

NIBE SOLAR 40

NIBE SOLAR 40 enables solar heating with your heat pump. With additional solar panels and VPAS you get a complete system.

NIBE SOLAR 42

NIBE SOLAR 42

NIBE SOLAR 42 enables solar heating with your heat pump. With additional solar panels and VPBS you get a complete system.

NIBE Top cabinet

NIBE Top cabinet

Top cabinet

NIBE RTS 40

NIBE RTS 40

Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.

NIBE EME 20

NIBE EME 20

Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.

NIBE EMK 300

NIBE EMK 300

Energy measurement kit for indoor unit.

NIBE PCM 40/42

NIBE PCM 40/42

Passive cooling module. Elegant and timeless design High flexibility for best indoor climate Passive cooling and hot water production simultaneously Installer-friendly Settings shown on the heat pump’s display Compatible with heat pumps in the NIBE F1145/F1245 and F1155/F1255 series. FEATURES OF NIBE PCM 40/PCM 42 The NIBE PCM accessory gives your installation a high degree of flexibility. It is compatible with the NIBE F1145/F1245 and F1155/F1255 series, which was developed in such a way as to enable all the heat pump’s potential applications - both free cooling and hot water production. Combine your heat pump with NIBE PCM for passive / free cooling. It works, even while your system is continually heating hot water. NIBE PCM is easily controlled via the heat pump’s control panel, where both settings and monitoring are easily handled at the push of a button. This accessory’s timeless design means that it blends in well with your other heat pump equipment.

NIBE POOL 40

NIBE POOL 40

An accessory that allows pool heating using heat pump. Max 17 kW. The heat pump controls the reversing valve, pool circulation pump and any heating circuit circulation pumps via POOL 40.

NIBE ERS 20-250

NIBE ERS 20-250

The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE ERS 10-400

NIBE ERS 10-400

The NIBE ERS 10-400 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 300 m2. The NIBE ERS 10-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE HPAC 40

NIBE HPAC 40

Climate exchange module. Elegant and timeless design,High flexibility for the best indoor climate, Passive cooling, Active cooling in combination with the heating of hot water, Installer-friendly, Settings shown on the heat-pump’s display.

NIBE OPT 10

NIBE OPT 10

NIBE OPT 10 is used to enable connection and control of gas boiler NIBE GBM 10-15

NIBE ACS 45

NIBE ACS 45

Active/Passive cooling (4-pipe). ACS 45 combined with a heat pump is a climate control system for heating and cooling houses and apartment buildings.

NIBE AXC 40

NIBE AXC 40

Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump

NIBE ECS 40

NIBE ECS 40

ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE ECS 41

NIBE ECS 41

Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE EF 45

NIBE EF 45

Extension frame

NIBE ELK 15

NIBE ELK 15

ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.

NIBE ELK 213

NIBE ELK 213

The NIBE ELK 213 is an electric heater designed for heating detached houses or smaller rental homes, as well as indirect heating of hot water. The NIBE ELK 213 can be installed together with a boiler, accumulator tank or heat pump. When installed together with a heat pump, for example, the electric heater automatically switches on to provide supplementary heating when the heating demand is greater than the heat pump’s capacity.

NIBE EME 10

NIBE EME 10

To optimise the use of solar generated electricity.

NIBE FLM

NIBE FLM

The NIBE FLM is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE FLM - Console package

NIBE FLM - Console package

FLM - Console package

NIBE HR 10

NIBE HR 10

Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.

NIBE HTS 40

NIBE HTS 40

HTS 40 is an accessory that records humidity and temperature.

NIBE KB 25

NIBE KB 25

Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.

NIBE MODBUS 40

NIBE MODBUS 40

A NIBE heat pump can be controlled and monitored by external Modbus equipped equipment.

NIBE NV 10

NIBE NV 10

Level monitor of brine collector circuit.

NIBE PCS 44

NIBE PCS 44

Passive cooling. PCS 44 is used when heat pump is installed in an installation with passive cooling.

NIBE PLEX

NIBE PLEX

Tap water exchanger. PLEX is a plate heat exchanger with plates manufactured from acid-resistant steel (SS 23 43). PLEX is available in seven different models. Insulation, consisting of two 30 mm-thick, moulded halves of polyurethane foam, corresponding to approx. 70 mm mineral wool, is included. The surface is covered by ABS plastic.

NIBE RMU 40

NIBE RMU 40

With RMU 40 you can control and monitor your Nibe heat pump from another room in the house.

NIBE SMS 40

NIBE SMS 40

GSM remote control. Settings via the heat pump’s display. Adjustment of operation mode via SMS. SMS notifications upon alarm and e g power failure. Status information via SMS.

NIBE SOLAR 40

NIBE SOLAR 40

NIBE SOLAR 40 enables solar heating with your heat pump. With additional solar panels and VPAS you get a complete system.

NIBE SOLAR 42

NIBE SOLAR 42

NIBE SOLAR 42 enables solar heating with your heat pump. With additional solar panels and VPBS you get a complete system.

NIBE Top cabinet

NIBE Top cabinet

Top cabinet

NIBE RTS 40

NIBE RTS 40

Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.

NIBE EME 20

NIBE EME 20

Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.

NIBE EMK 300

NIBE EMK 300

Energy measurement kit for indoor unit.

NIBE PCM 40/42

NIBE PCM 40/42

Passive cooling module. Elegant and timeless design High flexibility for best indoor climate Passive cooling and hot water production simultaneously Installer-friendly Settings shown on the heat pump’s display Compatible with heat pumps in the NIBE F1145/F1245 and F1155/F1255 series. FEATURES OF NIBE PCM 40/PCM 42 The NIBE PCM accessory gives your installation a high degree of flexibility. It is compatible with the NIBE F1145/F1245 and F1155/F1255 series, which was developed in such a way as to enable all the heat pump’s potential applications - both free cooling and hot water production. Combine your heat pump with NIBE PCM for passive / free cooling. It works, even while your system is continually heating hot water. NIBE PCM is easily controlled via the heat pump’s control panel, where both settings and monitoring are easily handled at the push of a button. This accessory’s timeless design means that it blends in well with your other heat pump equipment.

NIBE POOL 40

NIBE POOL 40

An accessory that allows pool heating using heat pump. Max 17 kW. The heat pump controls the reversing valve, pool circulation pump and any heating circuit circulation pumps via POOL 40.

NIBE ERS 20-250

NIBE ERS 20-250

The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE ERS 10-400

NIBE ERS 10-400

The NIBE ERS 10-400 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 300 m2. The NIBE ERS 10-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE HPAC 40

NIBE HPAC 40

Climate exchange module. Elegant and timeless design,High flexibility for the best indoor climate, Passive cooling, Active cooling in combination with the heating of hot water, Installer-friendly, Settings shown on the heat-pump’s display.

NIBE OPT 10

NIBE OPT 10

NIBE OPT 10 is used to enable connection and control of gas boiler NIBE GBM 10-15

NIBE ACS 45

NIBE ACS 45

Active/Passive cooling (4-pipe). ACS 45 combined with a heat pump is a climate control system for heating and cooling houses and apartment buildings.

NIBE AXC 40

NIBE AXC 40

Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump

NIBE ECS 40

NIBE ECS 40

ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE ECS 41

NIBE ECS 41

Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE EF 45

NIBE EF 45

Extension frame

NIBE ELK 15

NIBE ELK 15

ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.

NIBE ELK 213

NIBE ELK 213

The NIBE ELK 213 is an electric heater designed for heating detached houses or smaller rental homes, as well as indirect heating of hot water. The NIBE ELK 213 can be installed together with a boiler, accumulator tank or heat pump. When installed together with a heat pump, for example, the electric heater automatically switches on to provide supplementary heating when the heating demand is greater than the heat pump’s capacity.

NIBE EME 10

NIBE EME 10

To optimise the use of solar generated electricity.

NIBE FLM

NIBE FLM

The NIBE FLM is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE FLM - Console package

NIBE FLM - Console package

FLM - Console package

NIBE HR 10

NIBE HR 10

Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.

NIBE HTS 40

NIBE HTS 40

HTS 40 is an accessory that records humidity and temperature.

NIBE KB 25

NIBE KB 25

Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.

NIBE MODBUS 40

NIBE MODBUS 40

A NIBE heat pump can be controlled and monitored by external Modbus equipped equipment.

NIBE NV 10

NIBE NV 10

Level monitor of brine collector circuit.

NIBE PCS 44

NIBE PCS 44

Passive cooling. PCS 44 is used when heat pump is installed in an installation with passive cooling.

NIBE PLEX

NIBE PLEX

Tap water exchanger. PLEX is a plate heat exchanger with plates manufactured from acid-resistant steel (SS 23 43). PLEX is available in seven different models. Insulation, consisting of two 30 mm-thick, moulded halves of polyurethane foam, corresponding to approx. 70 mm mineral wool, is included. The surface is covered by ABS plastic.

NIBE RMU 40

NIBE RMU 40

With RMU 40 you can control and monitor your Nibe heat pump from another room in the house.

NIBE SMS 40

NIBE SMS 40

GSM remote control. Settings via the heat pump’s display. Adjustment of operation mode via SMS. SMS notifications upon alarm and e g power failure. Status information via SMS.

NIBE SOLAR 40

NIBE SOLAR 40

NIBE SOLAR 40 enables solar heating with your heat pump. With additional solar panels and VPAS you get a complete system.

NIBE SOLAR 42

NIBE SOLAR 42

NIBE SOLAR 42 enables solar heating with your heat pump. With additional solar panels and VPBS you get a complete system.

NIBE Top cabinet

NIBE Top cabinet

Top cabinet

NIBE RTS 40

NIBE RTS 40

Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.

NIBE EME 20

NIBE EME 20

Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.

NIBE EMK 300

NIBE EMK 300

Energy measurement kit for indoor unit.

NIBE PCM 40/42

NIBE PCM 40/42

Passive cooling module. Elegant and timeless design High flexibility for best indoor climate Passive cooling and hot water production simultaneously Installer-friendly Settings shown on the heat pump’s display Compatible with heat pumps in the NIBE F1145/F1245 and F1155/F1255 series. FEATURES OF NIBE PCM 40/PCM 42 The NIBE PCM accessory gives your installation a high degree of flexibility. It is compatible with the NIBE F1145/F1245 and F1155/F1255 series, which was developed in such a way as to enable all the heat pump’s potential applications - both free cooling and hot water production. Combine your heat pump with NIBE PCM for passive / free cooling. It works, even while your system is continually heating hot water. NIBE PCM is easily controlled via the heat pump’s control panel, where both settings and monitoring are easily handled at the push of a button. This accessory’s timeless design means that it blends in well with your other heat pump equipment.

NIBE POOL 40

NIBE POOL 40

An accessory that allows pool heating using heat pump. Max 17 kW. The heat pump controls the reversing valve, pool circulation pump and any heating circuit circulation pumps via POOL 40.

NIBE ERS 20-250

NIBE ERS 20-250

The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE ERS 10-400

NIBE ERS 10-400

The NIBE ERS 10-400 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 300 m2. The NIBE ERS 10-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE HPAC 40

NIBE HPAC 40

Climate exchange module. Elegant and timeless design,High flexibility for the best indoor climate, Passive cooling, Active cooling in combination with the heating of hot water, Installer-friendly, Settings shown on the heat-pump’s display.

NIBE OPT 10

NIBE OPT 10

NIBE OPT 10 is used to enable connection and control of gas boiler NIBE GBM 10-15

  • NIBE F1155 1,5-6 kW
  • NIBE F1155 3-12 kW
  • NIBE F1155 4-16 kW
Height (mm)
1500 
Width (mm)
600 
Depth (mm)
620 
Net weight (kg)
150 
Refrigerant volume, CO² equivalent (ton)
2,06 
Refrigerant volume, R407C (kg)
1,2 
System efficiency class room heating, 35 °C
A+++
System efficiency class room heating, 55 °C
A+++
Efficiency class water heating
A
Declared tap profile
XL 
Height (mm)
1500 
Width (mm)
600 
Depth (mm)
620 
Net weight (kg)
180 
Refrigerant volume, CO² equivalent (ton)
3,55 
Refrigerant volume, R407C (kg)
System efficiency class room heating, 35 °C
A+++
System efficiency class room heating, 55 °C
A+++
Efficiency class water heating
A
Declared tap profile
XXL 
Height (mm)
1500 
Width (mm)
600 
Depth (mm)
620 
Net weight (kg)
185 
Refrigerant volume, CO² equivalent (ton)
3,9 
Refrigerant volume, R407C (kg)
2,2 
System efficiency class room heating, 35 °C
A+++
System efficiency class room heating, 55 °C
A+++
Efficiency class water heating
A
Declared tap profile
XXL 
  • NIBE F1155 1,5-6 kW
  • NIBE F1155 3-12 kW
  • NIBE F1155 4-16 kW
  • NIBE F1155 1,5-6 kW
  • NIBE F1155 3-12 kW
  • NIBE F1155 4-16 kW