NIBE exhaust air heat pump

NIBE F470

Exhaust air heat pump
  • Product information
  • Advantages

NIBE F470 is an all-in-one exhaust and supply air heat pump which provides heating, ventilation, heat recovery and hot water efficiently, simply and economically. With its attractive, stylish design and compact size, the heat pump is easy to accommodate and install.

With its built-in hot water tank, immersion heater, circulation pump, fans and control system, the heat pump provides a reliable and economical source of heat. The heat pump can be connected to any low-temperature distribution system, e.g. radiators, convectors or underfloor heating. NIBE F470 can be connected to other heat sources, e.g. district heating.

Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected home. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

All-in-one exhaust and supply air system

Heating, hot water, ventilation and heat recovery.

Simple replacement

Cost-effective residential heating for the renovation and conversion market.

A simpler life

Connected home with smart technology for a simpler life.

  • Functions
  • Accessories
  • Technical data
  • Document
NIBE F470

NIBE Smart Price Adaption

With Smart Price Adaption, the heat pump receives information about the electricity prices for the next 24 hours and then adapts the operation to these. The function is based on information about the hourly prices of the coming day from the electricity exchange NordPool Spot. The prices in combination with expected heating and hot water needs then automatically control the heat pump. This is in order to reduce energy costs and which in the long run contributes to a smaller environmental impact.

NIBE AXC 20

NIBE EF 45

Extension frame.

NIBE DEH 40/41

This accessory is used to enable connection and control of external heat sources. NIBE DEH 40/41 is used for F370/F470 to enable connection and control of external heat sources as follows:DEH 40:Wood-fired boiler Oil boiler Multifunction tank DEH 41:Gas boiler The heat pump ventilates the building and recovers energy from the ventilation air. The heat is used to heat the building and the hot water. Normally additional output occurs via the heat pump’s immersion heater in the event that the heat pump output is not sufficient. The above alternative gives this additional output using external heat sources. If the power is not available in the external heat source the immersion heater is automatically engaged.In order to dock an external heat source the heat pump must be supplemented with two docking pipes, which are included in the docking kits DEH40/41.

NIBE PV

NIBE PV is an integrated solution which is based on a fully modular system with several basic sizes: 4 / 8 / 12 / 16 / 20 kW. Each basic package has nominal power of 4 kW and consists of 10 panels, mounting parts and an inverter with communication module, all of which are ready for installation. The solar package can easily be expanded with additional solar panels for optimum use of roof space. NIBE PV comprises of monocrystalline silicon cell panels which use PERC technology, with an output of 400 Wp. The solar panels are elegant, all-black panels. NIBE PV harnesses sunlight all year round and converts it into electricity. NIBE PV can be connected to your NIBE heat pump* for maximum energy efficiency. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected home. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time. * applies to systems which can be connected to NIBE Uplink and myUplink.

NIBE RMU 40

With RMU 40 you can control and monitor your Nibe heat pump from another room in the house.

NIBE EME 20

Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.

NIBE ECS 41

Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE ECS 40

ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE RTS 40

Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions:Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.

NIBE Top cabinet 345 mm

Top cabinet

NIBE Top Cabinet 385-635 mm

Top cabinet

NIBE Top cabinet 245 mm

Top cabinet

NIBE HTS 40

HTS 40 is an accessory that records humidity and temperature.

Height (mm)

2135

Depth (mm)

616

Net weight (kg)

218

Product efficiency class room heating, 35 °C

A+

Product efficiency class room heating, 55 °C

A+

System efficiency class room heating, 55 °C

A+

System efficiency class room heating, 35 °C

A+

Efficiency class water heating

A

Declared tap profile

L

Amount of hot water 40 °C (l)

200

User manual (UHB)
Installer manual (IHB)
Product leaflet (PBD)
Product leaflet (PBD)
Product catalogue (KBR) Exhaust air from NIBE
Energy Labels (ELI) NIBE F470
Consumer information leaflet (CIL)