All products

NIBE VVM 320

  • Product information
  • Advantages

NIBE VVM 320 is equipped with the new generation controller for comfort, good economy and safe operation. Clear information about status, operating time and all temperatures in the system is shown on the large and easy to read display. The NIBE VVM 320 has a built-in DHW storage tank of 185 litres. The indoor unit is connected to the air source outdoor unit and your house heating distribution system. It is prepared for connection to a number of different products and accessories, e.g swimming pool and climate systems with different temperatures

    Smart and user-friendly

    Customised function with smart control system.

    Integrated system

    Combine with a NIBE air source heat pump for an integrated system.

    Part of your smart home

    Control your comfort online using NIBE Uplink.

NIBE VVM 320
  • Product information
  • Advantages

NIBE VVM 320 is equipped with the new generation controller for comfort, good economy and safe operation. Clear information about status, operating time and all temperatures in the system is shown on the large and easy to read display. The NIBE VVM 320 has a built-in DHW storage tank of 185 litres. The indoor unit is connected to the air source outdoor unit and your house heating distribution system. It is prepared for connection to a number of different products and accessories, e.g swimming pool and climate systems with different temperatures

    Smart and user-friendly

    Customised function with smart control system.

    Integrated system

    Combine with a NIBE air source heat pump for an integrated system.

    Part of your smart home

    Control your comfort online using NIBE Uplink.

NIBE VVM 320
  • Accessories
  • Technical data
  • Document
NIBE POOL 310

NIBE POOL 310

Pool heating. POOL 310 is an accessory that enables pool heating with VVM 320.

NIBE RMU 40

NIBE RMU 40

With RMU 40 you can control and monitor your NIBE heat pump from another room in the house.

NIBE SMS 40

NIBE SMS 40

GSM remote control. Settings via the heat pump’s display. Adjustment of operation mode via SMS. SMS notifications upon alarm and e g power failure. Status information via SMS.

NIBE AXC 40

NIBE AXC 40

Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat Pump for hot water circulation Groundwater pump

NIBE ERS 10-400

NIBE ERS 10-400

The NIBE ERS 10-400/ERS 20-250 are heat recovery ventilation units with high temperature efficiency up to 92% and low energy consumption. The NIBE ERS 10 is used in houses with areas up to approx. 300 m2, NIBE ERS 20 up to approx. 200 m2. The NIBE ERS 10-400/ERS 20-250 are designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation units are easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE ECS 40

NIBE ECS 40

Extra heating circuit (maximum 80 m2 floor heating). ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE ECS 41

NIBE ECS 41

Extra heating circuit (maximum 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE EF 45

NIBE EF 45

NIBE PV

NIBE PV

NIBE PV is an integrated solution which is based on a fully modular system with three basic sizes: 3 / 3,6 / 4,2 kW. Each basic package has nominal power of 3,2 kW and consists of 10 panels, mounting parts and an inverter with communication module, all of which are ready for installation. The solar package can easily be expanded with additional solar panels for optimum use of roof space. NIBE PV comprises of monocrystalline silicon cell panels which use PERC technology, with an output of 300 Wp. The solar panels are elegant, all-black panels. NIBE PV harnesses sunlight all year round and converts it into electricity. NIBE PV can be connected to your NIBE heat pump* for maximum energy efficiency. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected home. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time. * applies to systems which can be connected to NIBE Uplink.

NIBE HTS 40

NIBE HTS 40

HTS 40 is an accessory that records humidity and temperature.

NIBE ERS 20-250

NIBE ERS 20-250

The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE EME 20

NIBE EME 20

Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.

NIBE ERS S10-400

NIBE ERS S10-400

The NIBE ERS S10-400 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 300 m2. The NIBE ERS S10-400 is designed for installation with a NIBE ground source heat pump or a NIBE air source heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.

Height (mm)
1800 
Width (mm)
600 
Depth (mm)
615 
Net weight (kg)
146 
Immersion heater output (kW)
  • Accessories
  • Technical data
  • Document
NIBE POOL 310

NIBE POOL 310

Pool heating. POOL 310 is an accessory that enables pool heating with VVM 320.

NIBE RMU 40

NIBE RMU 40

With RMU 40 you can control and monitor your NIBE heat pump from another room in the house.

NIBE SMS 40

NIBE SMS 40

GSM remote control. Settings via the heat pump’s display. Adjustment of operation mode via SMS. SMS notifications upon alarm and e g power failure. Status information via SMS.

NIBE AXC 40

NIBE AXC 40

Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat Pump for hot water circulation Groundwater pump

NIBE ERS 10-400

NIBE ERS 10-400

The NIBE ERS 10-400/ERS 20-250 are heat recovery ventilation units with high temperature efficiency up to 92% and low energy consumption. The NIBE ERS 10 is used in houses with areas up to approx. 300 m2, NIBE ERS 20 up to approx. 200 m2. The NIBE ERS 10-400/ERS 20-250 are designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation units are easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE ECS 40

NIBE ECS 40

Extra heating circuit (maximum 80 m2 floor heating). ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE ECS 41

NIBE ECS 41

Extra heating circuit (maximum 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE EF 45

NIBE EF 45

NIBE PV

NIBE PV

NIBE PV is an integrated solution which is based on a fully modular system with three basic sizes: 3 / 3,6 / 4,2 kW. Each basic package has nominal power of 3,2 kW and consists of 10 panels, mounting parts and an inverter with communication module, all of which are ready for installation. The solar package can easily be expanded with additional solar panels for optimum use of roof space. NIBE PV comprises of monocrystalline silicon cell panels which use PERC technology, with an output of 300 Wp. The solar panels are elegant, all-black panels. NIBE PV harnesses sunlight all year round and converts it into electricity. NIBE PV can be connected to your NIBE heat pump* for maximum energy efficiency. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected home. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time. * applies to systems which can be connected to NIBE Uplink.

NIBE HTS 40

NIBE HTS 40

HTS 40 is an accessory that records humidity and temperature.

NIBE ERS 20-250

NIBE ERS 20-250

The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE EME 20

NIBE EME 20

Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.

NIBE ERS S10-400

NIBE ERS S10-400

The NIBE ERS S10-400 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 300 m2. The NIBE ERS S10-400 is designed for installation with a NIBE ground source heat pump or a NIBE air source heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.

Height (mm)
1800 
Width (mm)
600 
Depth (mm)
615 
Net weight (kg)
146 
Immersion heater output (kW)