Products for larger properties
NIBE S1155
- Product information
- Advantages
- Leading technology
-
Leading inverter technology and separate hot water tank for optimum customization.
- Top performing
-
Four output sizes for optimal seasonal performance factor and minimal operating costs.
- User friendly
-
User-friendly touch control and integrated wireless connectivity with energy saving smart technology for maximum comfort.
- Accessories
- Technical data
- Document
-
NIBE VPB S200
The NIBE VPB S200 is an efficient hot water tank which is designed for connection to a heat pump, gas or oil boiler. The NIBE S200 can also be docked to solar panels. The NIBE VPB S200 has insulation made of polyurethane, which provides very good heat insulation.
-
NIBE VPB S300
The NIBE VPB S300 is an efficient hot water tank which is designed for connection to a heat pump, gas or oil boiler. The NIBE S300 can also be docked to solar panels. The NIBE VPB S300 has insulation made of polyurethane, which provides very good heat insulation.
-
NIBE ACS 45
Active/Passive cooling (4-pipe). ACS 45 combined with a heat pump is a climate control system for heating and cooling houses and apartment buildings.
-
NIBE AXC 40
Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump
-
NIBE ECS 40
ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
-
NIBE ECS 41
Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
-
NIBE EF 45
Extension frame
-
NIBE ELK 15
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.
-
NIBE ELK 213
The NIBE ELK 213 is an electric heater designed for heating detached houses or smaller rental homes, as well as indirect heating of hot water. The NIBE ELK 213 can be installed together with a boiler, accumulator tank or heat pump. When installed together with a heat pump, for example, the electric heater automatically switches on to provide supplementary heating when the heating demand is greater than the heat pump’s capacity.
-
NIBE ERS S10-400
The NIBE ERS S10-400 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 300 m2. The NIBE ERS S10-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE HR 10
Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.
-
NIBE HTS 40
HTS 40 is an accessory that records humidity and temperature.
-
NIBE KB 25
Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.
-
NIBE NV 10
Level monitor of brine collector circuit.
-
NIBE PCS 44
Passive cooling. PCS 44 is used when heat pump is installed in an installation with passive cooling.
-
NIBE POOL 40
An accessory that allows pool heating using heat pump. Max 17 kW. The heat pump controls the reversing valve, pool circulation pump and any heating circuit circulation pumps via POOL 40.
-
NIBE Top cabinet
Top cabinet
-
NIBE RMU S40
The NIBE RMU S40 is a room unit with 2,8” touch display with built in temperature and humidity sensors. It is used to control and monitor your NIBE S series heat pump/indoor module from another room in the house than the room where the heat pump is placed. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE VPA/VPAS
The NIBE VPA/VPAS is a double jacket hot water tank and accumulator tank with a large water tank which is primarily designed for connection to heat pumps or other heat sources. The NIBE VPA/VPAS has a copper or enamel corrosion-resistant coating. The NIBE VPA/VPAS can handle temperatures of up to 90°C and is equipped with a socket for an immersion heater as well as a temp sensor tube. The environmentally-friendly, efficient insulation provides the tank with very low energy loss. The insulation is detachable to facilitate installation. The NIBE VPAS in size 300/450 has a copper finned coil of 2.3 m² for connection of up to 15 m² solar panels. The NIBE VPA is available in three sizes; 200/70, 300/200 and 450/300.
-
NIBE KB 32
Combination valve for filling up the brine. Including insulation.
-
NIBE VPB 500-1000
The NIBE VPB 500/750/1000 is an efficient, copperlined hot water tank with a wide range of applications which is developed for connection to a heat pump, gas or oil boiler. The NIBE VPB 500/750/1000 has insulation made of Neopor and polyester fleece, which provides low energy loss. The insulation and outer shell are detachable to facilitate installation. The NIBE VPB 500/750/1000 is designed for buildings with large hot water requirements and can be connected in parallel for maximum capacity.
-
NIBE FLM S45
The NIBE FLM S45 is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM S45 has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use.
-
NIBE BAU 40
This accessory is used for the wall mounting of NIBE's compatible products SAM 40, SAM 41, FLM, F135 and Split installation of F730/F750
-
NIBE RTS 40
Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.
-
NIBE ERS 30-400
The NIBE ERS 30-400 is a heat recovery ventilation unit with high temperature efficiency up to 94% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 350 m2. The NIBE ERS 30-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
-
NIBE PVT 40
PVT 40 makes it possible for your heat pump to use PVT panels as a heat source. The heat pump regulates the temperature of incoming brine in the summer, and closes the shunt valve in the winter when the temperature reaches the set value.
-
NIBE BAU 10
This accessory is used for the wall mounting of: SAM 40, SAM 41, FLM, F135
-
NIBE ERS 20-250
The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
-
NIBE PLEX
Tap water exchanger. PLEX is a plate heat exchanger with plates manufactured from acid-resistant steel (SS 23 43). PLEX is available in seven different models. Insulation, consisting of two 30 mm-thick, moulded halves of polyurethane foam, corresponding to approx. 70 mm mineral wool, is included. The surface is covered by ABS plastic.
-
NIBE SOLAR 40
NIBE SOLAR 40 enables solar heating with your heat pump. With additional solar panels and VPAS you get a complete system.
-
NIBE SOLAR 42
NIBE SOLAR 42 enables solar heating with your heat pump. With additional solar panels and VPBS you get a complete system.
-
NIBE PCM S40
The NIBE PCM ground source accessory makes it possible to obtain passive cooling from rock, groundwater or surface soil collectors. Combine with your S Series heat pump for a flexible system. Even while your system is continually heating hot water it will cool your home. NIBE PCM is controlled via the heat pump’s touch control, where both settings and monitoring are handled with an easy swipe. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE PCM S42
The NIBE PCM ground source accessory makes it possible to obtain passive cooling from rock, groundwater or surface soil collectors. Combine with your S Series heat pump for a flexible system. Even while your system is continually heating hot water it will cool your home. NIBE PCM is controlled via the heat pump’s touch control, where both settings and monitoring are handled with an easy swipe. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE HPAC S40
Combine with your NIBE S Series heat pump for passive or active cooling. It will keep you cool even while your system is continually heating hot water.
-
NIBE UKV
The NIBE UKV is a series of buffer vessels which are primarily designed for connection to heat pumps to achieve greater volumes with the heating system. This optimises the operation of the heat pump. The NIBE UKV can also be connected to reduce temporary heat spikes caused by movements in the pipe installation during temperature changes. The NIBE UKV is available in the sizes 40, 100, 200, 300 and 500 litres. For systems with active cooling, it is best to use the condensation-insulated NIBE UKV 200 or NIBE UKV 300. For the NIBE UKV 500 the insulation can be removed to make handling the product easier.
-
NIBE VPB S200
The NIBE VPB S200 is an efficient hot water tank which is designed for connection to a heat pump, gas or oil boiler. The NIBE S200 can also be docked to solar panels. The NIBE VPB S200 has insulation made of polyurethane, which provides very good heat insulation.
-
NIBE VPB S300
The NIBE VPB S300 is an efficient hot water tank which is designed for connection to a heat pump, gas or oil boiler. The NIBE S300 can also be docked to solar panels. The NIBE VPB S300 has insulation made of polyurethane, which provides very good heat insulation.
-
NIBE RMU S40
The NIBE RMU S40 is a room unit with 2,8” touch display with built in temperature and humidity sensors. It is used to control and monitor your NIBE S series heat pump/indoor module from another room in the house than the room where the heat pump is placed. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE ACS 45
Active/Passive cooling (4-pipe). ACS 45 combined with a heat pump is a climate control system for heating and cooling houses and apartment buildings.
-
NIBE AXC 40
Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump
-
NIBE ECS 40
ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
-
NIBE ECS 41
Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
-
NIBE EF 45
Extension frame
-
NIBE ELK 15
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.
-
NIBE ELK 213
The NIBE ELK 213 is an electric heater designed for heating detached houses or smaller rental homes, as well as indirect heating of hot water. The NIBE ELK 213 can be installed together with a boiler, accumulator tank or heat pump. When installed together with a heat pump, for example, the electric heater automatically switches on to provide supplementary heating when the heating demand is greater than the heat pump’s capacity.
-
NIBE ERS S10-400
The NIBE ERS S10-400 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 300 m2. The NIBE ERS S10-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE HR 10
Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.
-
NIBE HTS 40
HTS 40 is an accessory that records humidity and temperature.
-
NIBE KB 25
Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.
-
NIBE NV 10
Level monitor of brine collector circuit.
-
NIBE PCS 44
Passive cooling. PCS 44 is used when heat pump is installed in an installation with passive cooling.
-
NIBE POOL 40
An accessory that allows pool heating using heat pump. Max 17 kW. The heat pump controls the reversing valve, pool circulation pump and any heating circuit circulation pumps via POOL 40.
-
NIBE Top cabinet
Top cabinet
-
NIBE VPA/VPAS
The NIBE VPA/VPAS is a double jacket hot water tank and accumulator tank with a large water tank which is primarily designed for connection to heat pumps or other heat sources. The NIBE VPA/VPAS has a copper or enamel corrosion-resistant coating. The NIBE VPA/VPAS can handle temperatures of up to 90°C and is equipped with a socket for an immersion heater as well as a temp sensor tube. The environmentally-friendly, efficient insulation provides the tank with very low energy loss. The insulation is detachable to facilitate installation. The NIBE VPAS in size 300/450 has a copper finned coil of 2.3 m² for connection of up to 15 m² solar panels. The NIBE VPA is available in three sizes; 200/70, 300/200 and 450/300.
-
NIBE KB 32
Combination valve for filling up the brine. Including insulation.
-
NIBE VPB 500-1000
The NIBE VPB 500/750/1000 is an efficient, copperlined hot water tank with a wide range of applications which is developed for connection to a heat pump, gas or oil boiler. The NIBE VPB 500/750/1000 has insulation made of Neopor and polyester fleece, which provides low energy loss. The insulation and outer shell are detachable to facilitate installation. The NIBE VPB 500/750/1000 is designed for buildings with large hot water requirements and can be connected in parallel for maximum capacity.
-
NIBE FLM S45
The NIBE FLM S45 is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM S45 has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use.
-
NIBE BAU 40
This accessory is used for the wall mounting of NIBE's compatible products SAM 40, SAM 41, FLM, F135 and Split installation of F730/F750
-
NIBE ERS 30-400
The NIBE ERS 30-400 is a heat recovery ventilation unit with high temperature efficiency up to 94% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 350 m2. The NIBE ERS 30-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
-
NIBE PVT 40
PVT 40 makes it possible for your heat pump to use PVT panels as a heat source. The heat pump regulates the temperature of incoming brine in the summer, and closes the shunt valve in the winter when the temperature reaches the set value.
-
NIBE ERS 20-250
The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
-
NIBE BAU 10
This accessory is used for the wall mounting of: SAM 40, SAM 41, FLM, F135
-
NIBE PLEX
Tap water exchanger. PLEX is a plate heat exchanger with plates manufactured from acid-resistant steel (SS 23 43). PLEX is available in seven different models. Insulation, consisting of two 30 mm-thick, moulded halves of polyurethane foam, corresponding to approx. 70 mm mineral wool, is included. The surface is covered by ABS plastic.
-
NIBE RTS 40
Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.
-
NIBE SOLAR 40
NIBE SOLAR 40 enables solar heating with your heat pump. With additional solar panels and VPAS you get a complete system.
-
NIBE SOLAR 42
NIBE SOLAR 42 enables solar heating with your heat pump. With additional solar panels and VPBS you get a complete system.
-
NIBE PCM S40
The NIBE PCM ground source accessory makes it possible to obtain passive cooling from rock, groundwater or surface soil collectors. Combine with your S Series heat pump for a flexible system. Even while your system is continually heating hot water it will cool your home. NIBE PCM is controlled via the heat pump’s touch control, where both settings and monitoring are handled with an easy swipe. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE PCM S42
The NIBE PCM ground source accessory makes it possible to obtain passive cooling from rock, groundwater or surface soil collectors. Combine with your S Series heat pump for a flexible system. Even while your system is continually heating hot water it will cool your home. NIBE PCM is controlled via the heat pump’s touch control, where both settings and monitoring are handled with an easy swipe. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE HPAC S40
Combine with your NIBE S Series heat pump for passive or active cooling. It will keep you cool even while your system is continually heating hot water.
-
NIBE UKV
The NIBE UKV is a series of buffer vessels which are primarily designed for connection to heat pumps to achieve greater volumes with the heating system. This optimises the operation of the heat pump. The NIBE UKV can also be connected to reduce temporary heat spikes caused by movements in the pipe installation during temperature changes. The NIBE UKV is available in the sizes 40, 100, 200, 300 and 500 litres. For systems with active cooling, it is best to use the condensation-insulated NIBE UKV 200 or NIBE UKV 300. For the NIBE UKV 500 the insulation can be removed to make handling the product easier.
-
NIBE VPB S200
The NIBE VPB S200 is an efficient hot water tank which is designed for connection to a heat pump, gas or oil boiler. The NIBE S200 can also be docked to solar panels. The NIBE VPB S200 has insulation made of polyurethane, which provides very good heat insulation.
-
NIBE VPB S300
The NIBE VPB S300 is an efficient hot water tank which is designed for connection to a heat pump, gas or oil boiler. The NIBE S300 can also be docked to solar panels. The NIBE VPB S300 has insulation made of polyurethane, which provides very good heat insulation.
-
NIBE RMU S40
The NIBE RMU S40 is a room unit with 2,8” touch display with built in temperature and humidity sensors. It is used to control and monitor your NIBE S series heat pump/indoor module from another room in the house than the room where the heat pump is placed. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE ACS 45
Active/Passive cooling (4-pipe). ACS 45 combined with a heat pump is a climate control system for heating and cooling houses and apartment buildings.
-
NIBE AXC 40
Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump
-
NIBE ECS 40
ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
-
NIBE ECS 41
Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
-
NIBE EF 45
Extension frame
-
NIBE ELK 15
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.
-
NIBE ELK 213
The NIBE ELK 213 is an electric heater designed for heating detached houses or smaller rental homes, as well as indirect heating of hot water. The NIBE ELK 213 can be installed together with a boiler, accumulator tank or heat pump. When installed together with a heat pump, for example, the electric heater automatically switches on to provide supplementary heating when the heating demand is greater than the heat pump’s capacity.
-
NIBE ERS S10-400
The NIBE ERS S10-400 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 300 m2. The NIBE ERS S10-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE HR 10
Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.
-
NIBE HTS 40
HTS 40 is an accessory that records humidity and temperature.
-
NIBE KB 25
Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.
-
NIBE NV 10
Level monitor of brine collector circuit.
-
NIBE PCS 44
Passive cooling. PCS 44 is used when heat pump is installed in an installation with passive cooling.
-
NIBE POOL 40
An accessory that allows pool heating using heat pump. Max 17 kW. The heat pump controls the reversing valve, pool circulation pump and any heating circuit circulation pumps via POOL 40.
-
NIBE Top cabinet
Top cabinet
-
NIBE VPA/VPAS
The NIBE VPA/VPAS is a double jacket hot water tank and accumulator tank with a large water tank which is primarily designed for connection to heat pumps or other heat sources. The NIBE VPA/VPAS has a copper or enamel corrosion-resistant coating. The NIBE VPA/VPAS can handle temperatures of up to 90°C and is equipped with a socket for an immersion heater as well as a temp sensor tube. The environmentally-friendly, efficient insulation provides the tank with very low energy loss. The insulation is detachable to facilitate installation. The NIBE VPAS in size 300/450 has a copper finned coil of 2.3 m² for connection of up to 15 m² solar panels. The NIBE VPA is available in three sizes; 200/70, 300/200 and 450/300.
-
NIBE KB 32
Combination valve for filling up the brine. Including insulation.
-
NIBE VPB 500-1000
The NIBE VPB 500/750/1000 is an efficient, copperlined hot water tank with a wide range of applications which is developed for connection to a heat pump, gas or oil boiler. The NIBE VPB 500/750/1000 has insulation made of Neopor and polyester fleece, which provides low energy loss. The insulation and outer shell are detachable to facilitate installation. The NIBE VPB 500/750/1000 is designed for buildings with large hot water requirements and can be connected in parallel for maximum capacity.
-
NIBE FLM S45
The NIBE FLM S45 is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM S45 has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use.
-
NIBE BAU 40
This accessory is used for the wall mounting of NIBE's compatible products SAM 40, SAM 41, FLM, F135 and Split installation of F730/F750
-
NIBE ERS 30-400
The NIBE ERS 30-400 is a heat recovery ventilation unit with high temperature efficiency up to 94% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 350 m2. The NIBE ERS 30-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
-
NIBE PVT 40
PVT 40 makes it possible for your heat pump to use PVT panels as a heat source. The heat pump regulates the temperature of incoming brine in the summer, and closes the shunt valve in the winter when the temperature reaches the set value.
-
NIBE ERS 20-250
The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
-
NIBE BAU 10
This accessory is used for the wall mounting of: SAM 40, SAM 41, FLM, F135
-
NIBE PLEX
Tap water exchanger. PLEX is a plate heat exchanger with plates manufactured from acid-resistant steel (SS 23 43). PLEX is available in seven different models. Insulation, consisting of two 30 mm-thick, moulded halves of polyurethane foam, corresponding to approx. 70 mm mineral wool, is included. The surface is covered by ABS plastic.
-
NIBE RTS 40
Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.
-
NIBE SOLAR 40
NIBE SOLAR 40 enables solar heating with your heat pump. With additional solar panels and VPAS you get a complete system.
-
NIBE SOLAR 42
NIBE SOLAR 42 enables solar heating with your heat pump. With additional solar panels and VPBS you get a complete system.
-
NIBE PCM S40
The NIBE PCM ground source accessory makes it possible to obtain passive cooling from rock, groundwater or surface soil collectors. Combine with your S Series heat pump for a flexible system. Even while your system is continually heating hot water it will cool your home. NIBE PCM is controlled via the heat pump’s touch control, where both settings and monitoring are handled with an easy swipe. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE PCM S42
The NIBE PCM ground source accessory makes it possible to obtain passive cooling from rock, groundwater or surface soil collectors. Combine with your S Series heat pump for a flexible system. Even while your system is continually heating hot water it will cool your home. NIBE PCM is controlled via the heat pump’s touch control, where both settings and monitoring are handled with an easy swipe. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE HPAC S40
Combine with your NIBE S Series heat pump for passive or active cooling. It will keep you cool even while your system is continually heating hot water.
-
NIBE UKV
The NIBE UKV is a series of buffer vessels which are primarily designed for connection to heat pumps to achieve greater volumes with the heating system. This optimises the operation of the heat pump. The NIBE UKV can also be connected to reduce temporary heat spikes caused by movements in the pipe installation during temperature changes. The NIBE UKV is available in the sizes 40, 100, 200, 300 and 500 litres. For systems with active cooling, it is best to use the condensation-insulated NIBE UKV 200 or NIBE UKV 300. For the NIBE UKV 500 the insulation can be removed to make handling the product easier.
-
NIBE VPB S200
The NIBE VPB S200 is an efficient hot water tank which is designed for connection to a heat pump, gas or oil boiler. The NIBE S200 can also be docked to solar panels. The NIBE VPB S200 has insulation made of polyurethane, which provides very good heat insulation.
-
NIBE VPB S300
The NIBE VPB S300 is an efficient hot water tank which is designed for connection to a heat pump, gas or oil boiler. The NIBE S300 can also be docked to solar panels. The NIBE VPB S300 has insulation made of polyurethane, which provides very good heat insulation.
-
NIBE ACS 45
Active/Passive cooling (4-pipe). ACS 45 combined with a heat pump is a climate control system for heating and cooling houses and apartment buildings.
-
NIBE AXC 40
Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump
-
NIBE ECS 40
ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
-
NIBE ECS 41
Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
-
NIBE EF 45
Extension frame
-
NIBE ELK 15
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.
-
NIBE ELK 213
The NIBE ELK 213 is an electric heater designed for heating detached houses or smaller rental homes, as well as indirect heating of hot water. The NIBE ELK 213 can be installed together with a boiler, accumulator tank or heat pump. When installed together with a heat pump, for example, the electric heater automatically switches on to provide supplementary heating when the heating demand is greater than the heat pump’s capacity.
-
NIBE ERS S10-400
The NIBE ERS S10-400 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 300 m2. The NIBE ERS S10-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE FLM S45
The NIBE FLM S45 is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM S45 has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use.
-
NIBE HR 10
Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.
-
NIBE HTS 40
HTS 40 is an accessory that records humidity and temperature.
-
NIBE KB 25
Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.
-
NIBE KB 32
Combination valve for filling up the brine. Including insulation.
-
NIBE NV 10
Level monitor of brine collector circuit.
-
NIBE PCS 44
Passive cooling. PCS 44 is used when heat pump is installed in an installation with passive cooling.
-
NIBE POOL 40
An accessory that allows pool heating using heat pump. Max 17 kW. The heat pump controls the reversing valve, pool circulation pump and any heating circuit circulation pumps via POOL 40.
-
NIBE RMU S40
The NIBE RMU S40 is a room unit with 2,8” touch display with built in temperature and humidity sensors. It is used to control and monitor your NIBE S series heat pump/indoor module from another room in the house than the room where the heat pump is placed. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.
-
NIBE VPA/VPAS
The NIBE VPA/VPAS is a double jacket hot water tank and accumulator tank with a large water tank which is primarily designed for connection to heat pumps or other heat sources. The NIBE VPA/VPAS has a copper or enamel corrosion-resistant coating. The NIBE VPA/VPAS can handle temperatures of up to 90°C and is equipped with a socket for an immersion heater as well as a temp sensor tube. The environmentally-friendly, efficient insulation provides the tank with very low energy loss. The insulation is detachable to facilitate installation. The NIBE VPAS in size 300/450 has a copper finned coil of 2.3 m² for connection of up to 15 m² solar panels. The NIBE VPA is available in three sizes; 200/70, 300/200 and 450/300.
-
NIBE VPB 500-1000
The NIBE VPB 500/750/1000 is an efficient, copperlined hot water tank with a wide range of applications which is developed for connection to a heat pump, gas or oil boiler. The NIBE VPB 500/750/1000 has insulation made of Neopor and polyester fleece, which provides low energy loss. The insulation and outer shell are detachable to facilitate installation. The NIBE VPB 500/750/1000 is designed for buildings with large hot water requirements and can be connected in parallel for maximum capacity.
-
NIBE Top cabinet
Top cabinet
-
NIBE ERS 30-400
The NIBE ERS 30-400 is a heat recovery ventilation unit with high temperature efficiency up to 94% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 350 m2. The NIBE ERS 30-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
-
NIBE PVT 40
PVT 40 makes it possible for your heat pump to use PVT panels as a heat source. The heat pump regulates the temperature of incoming brine in the summer, and closes the shunt valve in the winter when the temperature reaches the set value.
-
NIBE BAU 40
This accessory is used for the wall mounting of NIBE's compatible products SAM 40, SAM 41, FLM, F135 and Split installation of F730/F750
-
NIBE ELK 42
Electric boilers for additional heating for ground source heat pumps.
-
NIBE ELK 26
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating houses or
- Height (mm)
- 1500
- Width (mm)
- 600
- Depth (mm)
- 620
- Net weight (kg)
- 139
- Refrigerant amount, CO2 equivalent (ton)
- 2,06
- Refrigerant amount, R407C (kg)
- 1,16
- System efficiency class room heating, 35 °C
- A+++
- System efficiency class room heating, 55 °C
- A+++
- Product efficiency class room heating, 35 °C
- A+++
- Product efficiency class room heating, 55 °C
- A+++
- Height (mm)
- 1500
- Width (mm)
- 600
- Depth (mm)
- 620
- Net weight (kg)
- 167
- Refrigerant amount, CO2 equivalent (ton)
- 3,55
- Refrigerant amount, R407C (kg)
- 2,0
- System efficiency class room heating, 35 °C
- A+++
- System efficiency class room heating, 55 °C
- A+++
- Product efficiency class room heating, 35 °C
- A+++
- Product efficiency class room heating, 55 °C
- A+++
- Height (mm)
- 1500
- Width (mm)
- 600
- Depth (mm)
- 620
- Net weight (kg)
- 172
- Refrigerant amount, CO2 equivalent (ton)
- 3,90
- Refrigerant amount, R407C (kg)
- 2,2
- System efficiency class room heating, 35 °C
- A+++
- System efficiency class room heating, 55 °C
- A+++
- Product efficiency class room heating, 35 °C
- A+++
- Product efficiency class room heating, 55 °C
- A+++
- Height (mm)
- 1500
- Width (mm)
- 600
- Depth (mm)
- 620
- Net weight (kg)
- 205
- Refrigerant amount, CO2 equivalent (ton)
- 4,39
- Refrigerant amount, R410A (kg)
- 2,1
- System efficiency class room heating, 35 °C
- A+++
- System efficiency class room heating, 55 °C
- A+++
- Product efficiency class room heating, 35 °C
- A+++
- Product efficiency class room heating, 55 °C
- A+++
