- Product information
- Advantages
The NIBE F1245 PC is an all-in-one heat pump with hot water tank with a capacity of 180 litres and integrated passive cooling. The NIBE F1245 PC has a high seasonal performance factor and a high temperature range. The NIBE F1245 PC is available in the following output sizes: 6, 8, 10 kW. The heat pump is suitable for detached and terraced houses. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected home. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
Integrated
All-in-one heat pump with hot water tank and integrated cooling
Efficient
High seasonal performance factor – high temperature range
User-friendly
Energy-saving smart technology with user-friendly control
- Functions
- Accessories
- Technical data
- Document
NIBE Smart Price Adaption
With Smart Price Adaption, the heat pump receives information about the electricity prices for the next 24 hours and then adapts the operation to these. The function is based on information about the hourly prices of the coming day from the electricity exchange NordPool Spot. The prices in combination with expected heating and hot water needs then automatically control the heat pump. This is in order to reduce energy costs and which in the long run contributes to a smaller environmental impact.
myUplink
With the help of the Internet and myUplink, you get a quick overview of the heat pump's status and the status of the heating in your home. This flexible solution allows you to easily monitor and control the heat and hot water production. If the system is affected by operational disturbances, you will be notified quickly with a push notification and via e-mail.
Extended functions
With the help of our large range of accessories, the heat pump can offer a variety of functions for heating, cooling, ventilation and solar production. Click on the "Accessories" tab above to read more about the different accessories offered.
NIBE AXC 40
Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump
NIBE ECS 41
Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
NIBE EF 45
Extension frame.
NIBE VST 11
Provides the heat pump together with SMO 10 to prioritise hot water charging on systems with floating condensing. This also requires a hot water accumulator, for ex. NIBE VPA. Hot water control for max.electric charge output: 18 kW
NIBE SMS 40
GSM remote control. Settings via the heat pump’s display. Adjustment of operation mode via SMS. SMS notifications upon alarm and e g power failure. Status information via SMS.
NIBE FLM - Console package
FLM - Console package
NIBE ELK 15
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.
NIBE ELK 213
The NIBE ELK 213 is an electric heater designed for heating detached houses or smaller rental homes, as well as indirect heating of hot water. The NIBE ELK 213 can be installed together with a boiler, accumulator tank or heat pump. When installed together with a heat pump, for example, the electric heater automatically switches on to provide supplementary heating when the heating demand is greater than the heat pump’s capacity.
NIBE ELK 26
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating houses or
NIBE KB 32
Combination valve for filling up the brine. Including insulation.
NIBE NV 10
Level monitor of brine collector circuit.
NIBE VST 20
Makes hot water priority possible at large heat pump outputs. (charging power between 15 and 40 kW), together with an SMO 10 and F1330-40. This also requires a hot water accumulator, for example, NIBE VPA.
NIBE ELK 42
Electric boilers for additional heating for ground source heat pumps.
NIBE MODBUS 40
A NIBE heat pump can be controlled and monitored by external Modbus equipped equipment.
NIBE FLM
The NIBE FLM is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
NIBE KB 25
Combination valve for filling up the brine. Including insulation. For heat pumps max. 13 kW.
NIBE EMK 300
Energy measurement kit for indoor unit.
NIBE SOLAR 40
NIBE SOLAR 40 enables solar heating with your heat pump. With additional solar panels and VPAS you get a complete system.
NIBE OPT 10
NIBE OPT 10 is used to enable connection and control of gas boiler NIBE GBM 10-15
NIBE ECS 40
ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
NIBE RTS 40
Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions:Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.
NIBE SOLAR 42
NIBE SOLAR 42 enables solar heating with your heat pump. With additional solar panels and VPBS you get a complete system.
NIBE BAU 40
This accessory is used for the wall mounting of NIBE's compatible products SAM 40, SAM 41, FLM, F135 and Split installation of F730/F750
NIBE POOL 40
An accessory that allows pool heating using heat pump. Max 18 kW. The heat pump controls the reversing valve, pool circulation pumpand any heating circuit circulation pumps via POOL 40.
NIBE RMU 40
With RMU 40 you can control and monitor your Nibe heat pump from another room in the house.
NIBE HR 10
Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.
NIBE EME 20
Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.
NIBE HTS 40
HTS 40 is an accessory that records humidity and temperature.
Height (mm)
1800
Depth (mm)
620
Net weight (kg)
318
System efficiency class room heating, 55 °C
A++
System efficiency class room heating, 35 °C
A+++
Refrigerant amount, CO2 equivalent (ton)
2,66
Refrigerant amount, R407C (kg)
1,5
Declared tap profile
XL
Amount of hot water 40 °C (l)
235