NIBE product range

NIBE VVM S320

Air/Water heat pump
  • Product information
  • Advantages

The NIBE VVM S320 is designed for combination with any NIBE air/water heat pump to create a highly efficient climate system for your home.

The NIBE VVM S320 has a smart, user-friendly control system which provides efficient heating/cooling and hot water with high performance. The NIBE VVM S320 is ready for installation since the water heater, electric additional heat, self-regulating circulation pump, filling valve, manometer, safety valve and expansion vessel are included.

With integrated wifi, the S-Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.

Integrated system

Combine with a NIBE air/water heat pump for an integrated system

Smart

Smart, user-friendly control system.

User-friendly

User-friendly touch control and integrated wireless connectivity with energy saving smart technology for maximum comfort.

  • Functions
  • Accessories
  • Technical data
  • Document
NIBE VVM S320

Extended functions

With the help of our large range of accessories, the heat pump can offer a variety of functions for heating, cooling, ventilation and solar production. Click on the "Accessories" tab above to read more about the different accessories offered.

myUplink

With the help of the Internet and myUplink, you get a quick overview of the heat pump's status and the status of the heating in your home. This flexible solution allows you to easily monitor and control the heat and hot water production. If the system is affected by operational disturbances, you will be notified quickly with a push notification and via e-mail.

NIBE SRV 10

With a wireless radiator thermostat, it is easy for you to adjust the heat and energy consumption according to individual needs, room by room.

NIBE S135

The NIBE S135 is an exhaust air module designed for docking to a NIBE air/water heat pump and a NIBE VVM indoor module or NIBE SMO control module. The NIBE S135 uses the heat that is found in the house’s ventilation air to heat the house and hot water, at the same time as ventilating the house. In installations with cooling, hot water and cooling can be produced at the same time. The exhaust air module provides an improved seasonal performance factor and has a low noise level and high ventilation capacity. The NIBE S135 is easy to control through the heat pump’s indoor module. The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.

NIBE ACS 310

Active cooling

NIBE RMU S40

The NIBE RMU S40 is a room unit with 2,8” touch display with built in temperature and humidity sensors. It is used to control and monitor your NIBE S series heat pump/indoor module from another room in the house than the room where the heat pump is placed.The NIBE S Series is a natural part of your connected home. Smart technology adjusts the indoor climate automatically while you’re in complete control from your phone or tablet. Giving maximum comfort and minimum energy consumption, while doing nature a favour at the same time.

NIBE POOL 310

Pool heating

NIBE RPP 10

Enhances the signal, improving communication between your smart home products when they are placed at a distance from each other. For NIBE S- Series heating installations, the repeater functions as a switch, giving you the opportunity to control it remotely, schedule On and Off times and measure energy consumption. Plug in the repeater and connect it to your NIBE S-Series heating installation.

NIBE EMK 300

Energy measurement kit for indoor unit.

NIBE ECS 41

Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE Top cabinet 245 mm

Top cabinet

NIBE ROT 10

The wireless room thermostat allows you to read and control the temperature of a room or a climate zone from the display of the room thermostat or via the myUplink app in your smartphone. For instance by increasing the hot water production when you have many guests or lower the ventilation for better savings when you are not home. Because it is powered by a rechargeable battery, it is easy to install. Mount the thermostat in your room and connect it to your NIBE S-Series heat pump.

NIBE THS 10

This wireless sensor allows you to read the temperature and humidity in a room or climate zone using the myUplink app. On the heat pump you can see the current room temperature or change it in °C. THS 10 replaces the fixed indoor sensor. Because it is battery powered, it is easy to install. Mount the sensor in your room and connect it to your NIBE S-Series heating installation.

NIBE CDS 10

This wireless sensor allows you to read the CO2, temperature and humidity level in a room or climate zone using the myUplink app. For NIBE S-series heating installations with ventilation the indoor comfort level can automatically be adjusted to give you a comfortable indoor climate. For example, you can increase ventilation and lower the CO2 level when there are a lot of people present or lower the ventilation to further reduce your energy costs. Because it is battery powered, it is easy to install, but it can also operate with an external power source using a micro USB.Mount the sensor in your room and connect it to your NIBE S-Series heat and ventilation installation.

NIBE Top cabinet 345 mm

Top cabinet

NIBE Top Cabinet 385-635 mm

Top cabinet

NIBE AXC 40

Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump

NIBE ERS 30-400

The NIBE ERS 30-400 is a heat recovery ventilation unit with high temperature efficiency up to 94% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 350 m2. The NIBE ERS 30-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE EF 45

Extension frame.

NIBE EME 20

Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.

NIBE ECS 40

ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.

NIBE HTS 40

HTS 40 is an accessory that records humidity and temperature.

Height (mm)

1800

Depth (mm)

615

Net weight (kg)

141

Volume water heater (l)

178

Amount of hot water 40 °C (l)

240

User manual (UHB)
Installer manual (IHB) ( nl )
Installer manual (IHB)
Product leaflet (PBD)
Product catalogue (KBR) NIBE S Series heat pumps
Product catalogue (KBR) Air/water heat pumps
Energy Labels (ELI) NIBE F2040-6 + VVM S320
Energy Labels (ELI) 8kW
Energy Labels (ELI) 12kW
Energy Labels (ELI) NIBE F2040-8 + VVM S320
Energy Labels (ELI) NIBE F2040-12 + VVM S320
Consumer information leaflet (CIL)