Domestic Boilers
Customised function with smart control system
Combine with a NIBE air/water heat pump for an integrated system
Control your comfort online using NIBE Uplink
Active cooling
Possible connection and control of external heat source.
ECS 40 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
Extra heating circuit (recommended 80-250 m2 floor heating). ECS 41 is used when heat pump is installed in houses with up to four different climate systems that require different flow line temperatures, for example, in cases where the house has both a radiator system and an under floor heating system.
Extension frame
ELK 15 is an immersion heater primarily intended for installation together with heat pump for heating. NIBE ELK 15 contains overheating protection and contactors to externally regulate the two power groups, 5.0 and 10.0 kW.
The NIBE ELK 213 is an electric heater designed for heating detached houses or smaller rental homes, as well as indirect heating of hot water. The NIBE ELK 213 can be installed together with a boiler, accumulator tank or heat pump. When installed together with a heat pump, for example, the electric heater automatically switches on to provide supplementary heating when the heating demand is greater than the heat pump’s capacity.
To optimise the use of solar generated electricity.
Communication and control. EME 20 is used to enable communication and control between the inverter for solarcells and heat pump/indoor module/control module.
Energy measurement kit for indoor unit.
Energy measurement kit for indoor unit.
The NIBE F135 is an exhaust air module designed for docking to a NIBE air/water heat pump and a NIBE indoor module (VVM) or control module (SMO). The NIBE F135 uses the heat that is found in the house’s ventilation air to heat the house and hot water, at the same time as ventilating the house. In installations with cooling, hot water and cooling can be produced at the same time. The exhaust air module provides an improved seasonal performance factor and has a low noise level and high ventilation capacity. The NIBE F135 is easy to control through the heat pump’s indoor module. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.
HTS 40 is an accessory that records humidity and temperature.
A NIBE heat pump can be controlled and monitored by external Modbus equipped equipment.
Pool heating
NIBE PV is an integrated solution which is based on a
fully modular system with five basic sizes: 3,2 / 6,4 / 9,6 / 12,8 and 16 kW. Each basic package has nominal
power of 3,2 kW and consists of 10 panels, mounting
parts and an inverter with communication module, all
of which are ready for installation. The solar package
can easily be expanded with additional solar panels for
optimum use of roof space.
NIBE PV comprises of monocrystalline silicon cell
panels which use PERC technology, with an output
of 320 Wp. The solar panels are elegant, all-black
panels. NIBE PV harnesses sunlight all year round
and converts it into electricity. NIBE PV can be
connected to your NIBE heat pump* for maximum
energy efficiency.
Thanks to smart technology, the product gives you
control over your energy consumption and will be a
key part of your connected home. The efficient control
system automatically adjusts the indoor climate for
maximum comfort, and you do nature a favour at the
same time.
* applies to systems which can be connected to NIBE Uplink and myUplink.
With RMU 40 you can control and monitor your Nibe heat pump from another room in the house.
Possible connection and control of solar heating.
GSM remote control. Settings via the heat pump’s display. Adjustment of operation mode via SMS. SMS notifications upon alarm and e g power failure. Status information via SMS.
Top cabinet
NIBE OPT 10 is used to enable connection and control of gas boiler NIBE GBM 10-15
Accessory card. AXC 40 is used to enable connection and control of Mixing valve controlled additional heat, Pump for hot water circulation, Groundwater pump
The NIBE ERS 20-250 is a heat recovery ventilation unit with high temperature efficiency up to 92% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to 200 m2. The NIBE ERS 20-250 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for an integrated heating, hot water and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.
The NIBE ERS 30-400 is a heat recovery ventilation unit with high temperature efficiency up to 94% and low energy consumption. The heat recovery ventilation unit is used in houses with areas up to approx. 350 m2. The NIBE ERS 30-400 is designed for installation with a NIBE ground source heat pump or a NIBE air/water heat pump for a complete heating and ventilation system. The heat recovery ventilation unit is easily controlled by the heat pump. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.