All products

NIBE F1226

  • Product information
  • Advantages

NIBE F1226 is an all-in-one heat pump with integrated hot water tank. The heat pump is designed for detached and terraced houses. NIBE F1226 has an efficient compressor which provides high seasonal efficiency. The heat pump is available in the following output sizes: 6, 8 and 12 kW. NIBE F1226 is equipped with a control unit for reliable operation. A large backlit display uses icons and text to display clear information about status, operating time and all temperatures in the heat pump.

    All-in-one heat pump

    All-in-one heat pump with integrated hot water tank.

    Efficient heating

    Efficient compressor ensures a high seasonal performance factor.

    Reliable and user friendly

    Reliable operation and user-friendly display.

NIBE F1226
  • Accessories
  • Technical data
  • Document
  • NIBE F1226-6
  • NIBE F1226-8
  • NIBE F1226-12
  • NIBE F1226-6
  • NIBE F1226-8
  • NIBE F1226-12
NIBE EBV 200

NIBE EBV 200

Load monitor used to disconnect output that exceeds the output set on the load monitor.

NIBE EF 45

NIBE EF 45

Extension frame

NIBE EXC 40

NIBE EXC 40

Extra relay card required if ground heat pump and/or hot water circulation pump is to be connected to F1226. The extra relay card is installed inside the heat pump.

NIBE FLM - Console package

NIBE FLM - Console package

FLM - Console package

NIBE FLM

NIBE FLM

The NIBE FLM is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE HR 10

NIBE HR 10

Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.

NIBE KB 25

NIBE KB 25

Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.

NIBE NV 10

NIBE NV 10

Level monitor of brine collector circuit.

NIBE PLEX

NIBE PLEX

Tap water exchanger. PLEX is a plate heat exchanger with plates manufactured from acid-resistant steel (SS 23 43). PLEX is available in seven different models. Insulation, consisting of two 30 mm-thick, moulded halves of polyurethane foam, corresponding to approx. 70 mm mineral wool, is included. The surface is covered by ABS plastic.

NIBE RTS 40

NIBE RTS 40

Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.

NIBE OPT 10

NIBE OPT 10

NIBE OPT 10 is used to enable connection and control of gas boiler NIBE GBM 10-15

NIBE EBV 200

NIBE EBV 200

Load monitor used to disconnect output that exceeds the output set on the load monitor.

NIBE EF 45

NIBE EF 45

Extension frame

NIBE EXC 40

NIBE EXC 40

Extra relay card required if ground heat pump and/or hot water circulation pump is to be connected to F1226. The extra relay card is installed inside the heat pump.

NIBE FLM - Console package

NIBE FLM - Console package

FLM - Console package

NIBE FLM

NIBE FLM

The NIBE FLM is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE HR 10

NIBE HR 10

Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.

NIBE KB 25

NIBE KB 25

Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.

NIBE NV 10

NIBE NV 10

Level monitor of brine collector circuit.

NIBE PLEX

NIBE PLEX

Tap water exchanger. PLEX is a plate heat exchanger with plates manufactured from acid-resistant steel (SS 23 43). PLEX is available in seven different models. Insulation, consisting of two 30 mm-thick, moulded halves of polyurethane foam, corresponding to approx. 70 mm mineral wool, is included. The surface is covered by ABS plastic.

NIBE RTS 40

NIBE RTS 40

Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.

NIBE OPT 10

NIBE OPT 10

NIBE OPT 10 is used to enable connection and control of gas boiler NIBE GBM 10-15

NIBE EBV 200

NIBE EBV 200

Load monitor used to disconnect output that exceeds the output set on the load monitor.

NIBE EF 45

NIBE EF 45

Extension frame

NIBE EXC 40

NIBE EXC 40

Extra relay card required if ground heat pump and/or hot water circulation pump is to be connected to F1226. The extra relay card is installed inside the heat pump.

NIBE FLM - Console package

NIBE FLM - Console package

FLM - Console package

NIBE FLM

NIBE FLM

The NIBE FLM is an exhaust air module with built-in fan, specially designed for combining recycling of mechanical exhaust air with a NIBE ground source heat pump, providing an integrated solution for ventilation, hot water and heating. The NIBE FLM has a high fan capacity and low noise level. Energy is recovered from the ventilation air; even when the heat pump is not in operation, energy is stored in the ground or soil collector and exhaust air energy is thus put to maximum use. Thanks to smart technology, the product gives you control over your energy consumption and will be a key part of your connected lifestyle. The efficient control system automatically adjusts the indoor climate for maximum comfort, and you do nature a favour at the same time.

NIBE HR 10

NIBE HR 10

Auxiliary relay HR 10 is a connection box housing a contactor and a rotary selector switch. It is used to control external 1 to 3-phase loads such as oil burners, immersion heaters and pumps.

NIBE KB 25

NIBE KB 25

Combination valve for filling up the brine. Including insulation. For heat pumps max. 12 kW.

NIBE NV 10

NIBE NV 10

Level monitor of brine collector circuit.

NIBE PLEX

NIBE PLEX

Tap water exchanger. PLEX is a plate heat exchanger with plates manufactured from acid-resistant steel (SS 23 43). PLEX is available in seven different models. Insulation, consisting of two 30 mm-thick, moulded halves of polyurethane foam, corresponding to approx. 70 mm mineral wool, is included. The surface is covered by ABS plastic.

NIBE RTS 40

NIBE RTS 40

Room sensor used to obtain a more even indoor temperature. RTS 40 has up to three functions: Show current room temperature in the heat pump's display. Option of changing the room temperature in °C. Makes it possible to change/stabilise the room temperature.

NIBE OPT 10

NIBE OPT 10

NIBE OPT 10 is used to enable connection and control of gas boiler NIBE GBM 10-15

  • NIBE F1226-6
  • NIBE F1226-8
  • NIBE F1226-12
Height (mm)
1800 
Width (mm)
600 
Depth (mm)
620 
Net weight (kg)
235 
Refrigerant volume, CO² equivalent (ton)
1,6 
Refrigerant volume, R407C (kg)
0,9 
System efficiency class room heating, 35 °C
A++
System efficiency class room heating, 55 °C
A++
Product efficiency class room heating, 35 °C
A++
Product efficiency class room heating, 55 °C
A++
Efficiency class water heating
A
Declared tap profile
XL 
Height (mm)
1800 
Width (mm)
600 
Depth (mm)
620 
Net weight (kg)
245 
Refrigerant volume, CO² equivalent (ton)
1,96 
Refrigerant volume, R407C (kg)
1,1 
System efficiency class room heating, 35 °C
A+++
System efficiency class room heating, 55 °C
A++
Product efficiency class room heating, 35 °C
A++
Product efficiency class room heating, 55 °C
A++
Efficiency class water heating
A
Declared tap profile
XL 
Height (mm)
1800 
Width (mm)
600 
Depth (mm)
620 
Net weight (kg)
255 
Refrigerant volume, CO² equivalent (ton)
2,13 
Refrigerant volume, R407C (kg)
1,2 
System efficiency class room heating, 35 °C
A+++
System efficiency class room heating, 55 °C
A++
Product efficiency class room heating, 35 °C
A++
Product efficiency class room heating, 55 °C
A++
Efficiency class water heating
A
Declared tap profile
XL 
  • NIBE F1226-6
  • NIBE F1226-8
  • NIBE F1226-12
  • NIBE F1226-6
  • NIBE F1226-8
  • NIBE F1226-12