NIBE™ FIGHTER 200P

Mechanical ventilation system with local outside air postflow using a heat pump, which heats domestic hot water and radiator water using exhaust air energy.

Area of application

The NIBE FIGHTER 200P is designed for flats and single houses with small heating demands of about 2 – 4 kW (NE standard) with an average room height of 2.50 m.

Image: Exhaust air heat pumps/Product range/NIBE™ FIGHTER 200P
Print Tip a friend!

Technical description

In the NIBE FIGHTER 200P the controlled domestic ventilation system with heat recovery via a heat pump is combined with heating the domestic hot water and radiator water.

The NIBE FIGHTER 200P is a complete system to replace both the conventional gas condensing boiler, hot water tank and the separate heat recovery ventilation system.

The NIBE FIGHTER 200P is ideal for both low-temperature heating systems and underfloor and wall heating.

The NIBE FIGHTER 200P is to be controlled by a room thermostat. The NIBE FIGHTER 200P also has additional heating in the form of an integrated immersion heater of 3.0 kW. This only switches on automatically when required, as the basic heating function is provided by the heat pump.

The operator panel has all its switches and buttons arranged in a user-friendly manner, making it easy to operate.

Image: Exhaust air heat pumps/Product range/NIBE™ FIGHTER 200P
Print Tip a friend!
Height 2095 mm
Width 600 mm
Depth 615 mm
Net weight 195 kg
Water capacity, outer jacket 70 liters
Water capacity, cylinder 170 liters
Voltage 230 V (1-phase+N)
Refrigerant R290 (Propan)
Compressor rated output (Pel) 550 W
Immersion heater rated output 3,0 kW
Corrosion protection Cu

 

Savings/year * 4000 - 7500 kWh/year

* Value varies, as it is dependent on the energy extracted and exhaust air volume flow.

 

Rights to make any design modifications are reserved.

Print Tip a friend!